Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 20 No. 1, April 2016, Pages 1-11

I. Nasrudin1,*, C. S. M. Syafiqiuddin1
1Department of Aeronautical, Automotive and Ocean Engineering, Universiti Teknologi
Malaysia, 81310 Johor, Malaysia
*Corresponding author: nasrudin@fkm.utm.my

KEYWORDS

PMS, Parallel Operation, Generator, Control System, Signal, Parameter, Methods

ABSTRACT

Through the 20th century and up to present day, ship’s diesel electric power plant have typically operated with an excess of parallel generator capacity online providing redundancy to ensure that all vital system have power in the casualty event. Power Management System (PMS) is most crucial system in the ship diesel electric propulsion plant. It in-charge to manage power generate by prime mover and being distributed to consumer in electric propulsion system. The PMS entails the integration of the ship’s electric plant and electric load management with ship operation and machinery system control as an automated control function. The parallel operation of generators will be introduced to get best performance of the PMS. The vessels that have this system are typically electrical ship such as cruise ship, LNG carrier and modern container ship. This thesis will highlight the parameters and methods that were used in the design of the PMS. The study involved the parallel operation of generators and electric propulsion plant in the system which are control system and other components. Control system are one the most important components in PMS to make sure the generating sets and power distribution are managed wisely by the system. Besides, the thruster is crucial component and major consumer in electric propulsion system and it should be managed cautiously because to prevent blackout occur. There a lot important parameter in PMS such as frequency, power, inertial time constant and others. The control system are used by the approach methods in design of the PMS to deliver all signals to consumers to ensure the power being distributed according to the operation of ship demand.

CITE THIS ARTICLE

MLA
Nasrudin, I., et al. “Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 20.1 (2016): 1-11.

APA
Nasrudin, I., & Syafiqiuddin, C. S. M. (2016). Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 20(1), 1-11.

Chicago
Nasrudin, I., and C. S. M. Syafiqiuddin. “Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 20, no. 1 (2016): 1-11.

Harvard
Nasrudin, I. and Syafiqiuddin, C.S.M., 2016. Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 20(1), pp.1-11.

Vancouver
Nasrudin, I, Syafiqiuddin, CSM. Design Study of Power Management System for Parallel Operation of Generator Set of a Ship’s Diesel Electric Power Plant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2016;20(1):1-11.

REFERENCES

[1] Radan, Damir. “Integrated control of marine electrical power systems.” Department of Marine Technology, Norwegian University of Science and Technology (2008).
[2] Sorensen, A. J., “Marine Control System.” Norwegian University of Science and Technology (2012).
[3] International Marine Contractors Association. “A Guide to DP Electrical Power and Control Systems.” (2010).
[4] Hansen, Jan Fredrik, and Alf Kåre Ådnanes. “Blackout Prevention & Recovery.” In Dynamic Positioning Conference. 2009.
[5] Pedersen, Tom Arne, and Eilif Pedersen. “Bond graph modelling of marine power systems.” Mathematical and Computer Modelling of Dynamical Systems 18, no. 2 (2012): 153-173.
[6] Katiraei, Faridaddin, and Mohammad Reza Iravani. “Power management strategies for a microgrid with multiple distributed generation units.” Power Systems, IEEE Transactions on 21, no. 4 (2006): 1821-1831.
[7] Radan, Damir, Øyvind N. Smogeli, Asgeir J. Sørensen, and A. K. Adnanes. “Operating criteria for design of power management systems on ships.” InProc. of the 7th IFAC Conference on Manoeuvring and Control of Marine Craft (MCMC’06). 2006.
[8] Islam, M. M., “A Guide to Electrical Installation on Shipboard.” Handbook to IEEE Standard 45, (2004).
[9] Morse, J. C., D.C. Simon, and T.V. Nguyen, “A Case for Power Management of Ship Power System: Improving Operational Efficiency while Maintaining Survivability and Operational Performance.” Naval and Marine System Division Northrop Grumman Corporation, Charlottesville, Virginia USA, (2012).
[10] Amin, Engamria, Dr Hamdy Ahmed Ashour, and Dr Magdy Mostafa El-Attar. “Load Sharing Realization Of Parallel Operated Synchronous Generators Within Ship MicroGrid Using Microcontrollers.” (2013).
[11] Luo, Le, Lan Gao, and Hehe Fu. “The Control and Modeling of Diesel Generator Set in Electric Propulsion Ship.” International Journal of Information Technology and Computer Science (IJITCS) 3, no. 2 (2011): 31.
[12] Wu, Ren-Hua. “A manipulation and control scheme of paralleled diesel-generating sets in China.” In Telecommunications Energy Conference, 1992. INTELEC’92, 14th International, pp. 392-398. IEEE, 1992.
[13] Gawande, S. P., and K. B. Porate. “Review of parallel operation of synchronous generator and induction generator for stability.” In Emerging Trends in Engineering and Technology (ICETET), 2009 2nd International Conference on, pp. 716-721. IEEE, 2009.
[14] Koczara, Wlodzimierz, Marcin C. Moskwa, Neil L. Brown, Jawad Al-Tayie, and Emil Ernest. “Parallel operation of decoupled generation systems.” InIndustrial Electronics, 2008. ISIE 2008. IEEE International Symposium on, pp. 1616-1621. IEEE, 2008.
[15] Radan, Damir, Tor A. Johansen, Asgeir J. Sorensen, and Alf Kare Adnanes. “Optimization of load dependent start tables in marine power management systems with blackout prevention.” WSEAS Transactions on circuits and systems 4, no. 12 (2005): 1861-1866.
[16] Haque, M. H. “Demonstration of parallel operation of single-phase and three-phase induction generators for off-grid operation.” In Sustainable Energy Technologies, 2008. ICSET 2008. IEEE International Conference on, pp. 40-45. IEEE, 2008.
[17] Mihic, Kresimir, Tajana Simunic, and Giovanni De Micheli. “Reliability and power management of integrated systems.” In Digital System Design, 2004. DSD 2004. Euromicro Symposium on, pp. 5-11. IEEE, 2004.
[18] Radan, Damir, Øyvind N. Smogeli, Asgeir J. Sørensen, and A. K. Adnanes. “Operating criteria for design of power management systems on ships.” InProc. of the 7th IFAC Conference on Manoeuvring and Control of Marine Craft (MCMC’06). 2006.
[19] Yusri, A. S., “Design Study of Power Management System of a Ship’s Diesel Electric Power Plant.” Universiti Teknologi Malaysia, Johor, Malaysia (2012).