Reduction in Fuel Consumption Through Eco-Driving: A Review
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 22 No. 1, June 2016, Pages 1-7
M. A. Khattak1,*, A. Mukhtar2, S. Khan2, S. A. Hussain2, U. Akram2, A. Anwar2, S. Kazi3
1Department of Nuclear Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 Skudai Johor, Malaysia
2Faculty of Engineering & Technology, HITEC University, Taxila Pakistan
3Department of Mechanical Engineering, The Islamic University Madinah, P.O. Box 170 Madinah, 41411, Saudi Arabia
*Corresponding author: email@example.com
Eco-systems, Motorbike, Pollution, Euro systems, Combustion
Eco-systems currently being implemented all around the world. The Euro emission control is introduced on the same basis, to decrease pollution of the environment and make the vehicles more eco-friendly. Idea is on the same basis of developing an eco-bike engine model which will use its exhaust emissions to pre-heat its air-fuel mixture with the help of a heat exchanger, that will increase the inlet mixture temperature and vaporize any water content so that better and full combustion occurs which will emit less no. of harmful emissions than a standard running motorbike.
CITE THIS ARTICLE
Khattak, M. A., et al. “Reduction in Fuel Consumption Through Eco-Driving: A Review.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 22.1 (2016): 1-7.
Khattak, M. A., Mukhtar, A., Khan, S., Hussain, S. A., Akram, U., Anwar, A., & Kazi, S. (2016). Reduction in Fuel Consumption Through Eco-Driving: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 22(1), 1-7.
Khattak, M. A., A. Mukhtar, S. Khan, S. A. Hussain, U. Akram, A. Anwar, and S. Kazi. “Reduction in Fuel Consumption Through Eco-Driving: A Review.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 22, no. 1 (2016): 1-7.
Khattak, M.A., Mukhtar, A., Khan, S., Hussain, S.A., Akram, U., Anwar, A. and Kazi, S., 2016. Reduction in Fuel Consumption Through Eco-Driving: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 22(1), pp.1-7.
Khattak, MA, Mukhtar, A, Khan, S, Hussain, SA, Akram, U, Anwar, A, Kazi, S. Reduction in Fuel Consumption Through Eco-Driving: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2016;22(1):1-7.
 Bord, Richard J., Ann Fisher, and Robert E. O’Connor. “Public perceptions of global warming: United States and international perspectives.” Climate Research 11, no. 1 (1998): 75-84.
 Boykoff, Maxwell T., and Jules M. Boykoff. “Balance as bias: global warming and the US prestige press.” Global environmental change 14, no. 2 (2004): 125-136.
 Woodcock, James, Phil Edwards, Cathryn Tonne, Ben G. Armstrong, Olu Ashiru, David Banister, Sean Beevers et al. “Public health benefits of strategies to reduce greenhousegas emissions: urban land transport.” The Lancet 374, no. 9705 (2009): 1930-1943.
 Faiz, Asif, Christopher S. Weaver, and Michael P. Walsh. Air pollution from motor vehicles: standards and technologies for controlling emissions. World Bank Publications, 1996.
 Hamilton, Clive. “Why we resist the truth about climate change.” In Climate Controversies: Science and Politics conference, Brussels, October, vol. 28. 2010.
 Mitchell, William J. Reinventing the automobile: Personal urban mobility for the 21st century. MIT press, 2010.
 Howey, David, Robin North, and Ricardo Martinez-Botas. “Road transport technology and climate change mitigation.” Grantham Institute for Climate Change, Imperial College London 10 (2010).
 Høyer, Karl Georg. “The history of alternative fuels in transportation: The case of electric and hybrid cars.” Utilities Policy 16, no. 2 (2008): 63-71.
 Soltic, Patrik, and Martin Weilenmann. “NO 2/NO emissions of gasoline passenger cars and light-duty trucks with Euro-2 emission standard.” Atmospheric Environment 37, no. 37 (2003): 5207-5216.
 Chatterjee, Sougato, Andrew P. Walker, and Philip G. Blakeman. Emission control options to achieve Euro IV and Euro V on heavy duty diesel engines. No. 2008-28-0021. SAE Technical Paper, 2008.
 Goranflo, Richard J. “Method and system for preheating fuel.” U.S. Patent 4,475,523, issued October 9, 1984.
 Pope, Joseph William. “Fuel-heating apparatus for internal-combustion engines.” U.S. Patent 1,168,111, issued January 11, 1916.
 Lundi, Axel J. “Fuel preheater and economizer.” U.S. Patent 3,110,296, issued November 12, 1963.
 Richard, Henri. “Fuel heating system for an internal combustion engine.” U.S. Patent 3,913,543, issued October 21, 1975.
 Kitamura, Yasutaka, Ali Mohammadi, Takuji Ishiyama, and Masahiro Shioji.Fundamental investigation of NOx formation in diesel combustion under supercharged and EGR conditions. No. 2005-01-0364. SAE Technical Paper, 2005.
 Fukuda, Masanori, Koji Yamane, T. Neichi, and Makoto Ikegami. “Reduction of nitrogen oxides of diesel engines by exhaust-gas-selective recirculation.” In Proceedings of the Fourth International Symposium COMODIA, vol. 98, pp. 93-98. 1998.
 Jacobs, Timothy, Dennis Assanis, and Zoran Filipi. “The impact of exhaust gas recirculation on performance and emissions of a heavy-duty diesel engine.” SAE paper 1068 (2003).
 Zhao, H., J. Hu, and N. Ladommatos. “In-cylinder studies of the effects of CO2 in exhaust gas recirculation on diesel combustion and emissions.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 214, no. 4 (2000): 405-419.
 White, Frank M. “Fluid Mechanics fourth edition, McGraw and Hill.” International Edition, Singapore (1994).
 Cengel, Yunus A., Sanford Klein, and William Beckman. Heat transfer: a practical approach. Vol. 141. New York: McGraw-Hill, 1998.
 Suga, Toshiyuki, Shinichi Kitajima, and Horiki Kodama. “Air-fuel ratio control method for an internal combustion engine having spark plugs with heaters.” U.S. Patent 5,044,331, issued September 3, 1991.
 Ferguson, Colin R., and Allan T. Kirkpatrick. Internal combustion engines: applied thermosciences. John Wiley & Sons, 2015.