Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 57, No. 1, May 2019, Pages 40-47

Hemas Hafidh Bachtiar1, Boy Arief Fachri2, Nasrul Ilminnafik1,*

1 Department of Mechanical Engineering, University of Jember – 68121 Jember, Indonesia
2 Department of Chemical Engineering, University of Jember – 68121 Jember, Indonesia
*Corresponding author: nasrul.teknik@unej.ac.id

Cite this article
MLA
Hemas Hafidh, Bachtiar, et al. "Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57.1 (2019): 40-47.
APA

Hemas Hafidh, B., Boy Arief, F., & Nasrul, I.(2019). Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57(1), 40-47.
Chicago
Hemas Hafidh Bachtiar, Boy Arief Fachri, and Nasrul Ilminnafik."Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 57, no. 1 (2019): 40-47.
Harvard
Hemas Hafidh, B., Boy Arief, F., Nasrul, I., 2019. Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57(1), pp. 40-47.
Vancouver

Hemas Hafidh B, Boy Arief F, Nasrul I. Flame Characteristics of Diffusion of Calophyllum inophyllum Methyl Ester on Mini Glass Tube. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2019;57(1): 40-47.

KEYWORDS

Calophyllum inophyllum; Glass Tube; Diffusion Flame Characteristics

ABSTRACT

Combustion is a chain chemical reaction that is influenced by three factors, namely fuel, oxidizer, and heat. This study analyzes the effect variations of fuel flow rates (1 ml/h, 2 ml/h, and 3 ml/h) on the laminar burning velocity, flame height and flame stability as seen from the number of explosions. This study uses Calophyllum inophyllum methyl ester fuel. In the diffusion combustion process, the fuel mixes with the oxidizer naturally. In this study, it is known that the flow rate of 1 ml/h produces the highest average laminar burning velocity value of 0.0023 m/s and the lowest laminar burning velocity value is 0.0020 m/s at the flow rate of 3 ml/h. Whereas for the height of the flame has the highest average value at the flow rate of 3 ml/h which is 27.98 mm and the lowest average high flame value at the fuel flow rate of 1 ml/h is 2.9 mm.

REFERENCES

[1] Demirbas, Ayhan, Abdullah Bafail, Waqar Ahmad, and Manzoor Sheikh. "Biodiesel production from non-edible plant oils." Energy Exploration & Exploitation 34, no. 2 (2016): 290-318.
[2] Baskar, G., and R. Aiswarya. "Trends in catalytic production of biodiesel from various feedstocks." Renewable and Sustainable Energy Reviews 57 (2016): 496-504.
[3] Lubis, Hamzah. "Renewable Energy of Rice Husk for Reducing Fossil Energy in Indonesia." Journal of Advanced Research in Applied Sciences and Engineering Technology 11, no. 1 (2018): 17-22.
[4] Atabani, A. E., and Aldara da Silva César. "Calophyllum inophyllum L.–A prospective non-edible biodiesel feedstock. Study of biodiesel production, properties, fatty acid composition, blending and engine performance." Renewable and Sustainable Energy Reviews 37 (2014): 644-655.
[5] Ashok, B., K. Nanthagopal, R. Thundil Karuppa Raj, J. Pradeep Bhasker, and D. Sakthi Vignesh. "Influence of injection timing and exhaust gas recirculation of a Calophyllum inophyllum methyl ester fuelled CI engine." Fuel Processing Technology 167 (2017): 18-30.
[6] Nanthagopal, K., B. Ashok, and R. Thundil Karuppa Raj. "Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine." Energy Conversion and Management 116 (2016): 165-173.
[7] Hayder, G., and P. Puniyarasen. "Identification and evaluation of wastes from biodiesel production process." Journal of Advanced Research in Applied Sciences and Engineering Technology 3, no. 1 (2016): 21-29.
[8] Ong, Hwai Chyuan, H. H. Masjuki, T. M. I. Mahlia, A. S. Silitonga, W. T. Chong, and K. Y. Leong. "Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine." Energy Conversion and Management 81 (2014): 30-40.
[9] Atabani, A. E., Irfan Anjum Badruddin, T. M. I. Mahlia, H. H. Masjuki, M. Mofijur, Keat Teong Lee, and W. T. Chong. "Fuel properties of Croton megalocarpus, Calophyllum inophyllum, and Cocos nucifera (coconut) methyl esters and their performance in a multicylinder diesel engine." Energy Technology 1, no. 11 (2013): 685-694.
[10] Milano, Jassinnee, Hwai Chyuan Ong, H. H. Masjuki, A. S. Silitonga, Wei-Hsin Chen, F. Kusumo, S. Dharma, and A. H. Sebayang. "Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology." Energy conversion and management 158 (2018): 400-415.
[11] Jain, Mohit, Usha Chandrakant, Valerie Orsat, and Vijaya Raghavan. "A review on assessment of biodiesel production methodologies from Calophyllum inophyllum seed oil." Industrial crops and products 114 (2018): 28-44.
[12] Ashok, B., K. Nanthagopal, and D. Sakthi Vignesh. "Calophyllum inophyllum methyl ester biodiesel blend as an alternate fuel for diesel engine applications." Alexandria engineering journal 57, no. 3 (2018): 1239-1247.
[13] Silitonga, A. S., Hwai Chyuan Ong, T. M. I. Mahlia, H. H. Masjuki, and W. T. Chong. "Biodiesel conversion from high FFA crude jatropha curcas, calophyllum inophyllum and ceiba pentandra oil." Energy Procedia 61 (2014): 480-483.
[14] Glassman, Irvin, Richard A. Yetter, and Nick G. Glumac. Combustion. Academic press, 2014.
[15] Chen, J., X. F. Peng, Z. L. Yang, and J. Cheng. "Characteristics of liquid ethanol diffusion flames from mini tube nozzles." Combustion and Flame 156, no. 2 (2009): 460-466.
[16] Bapu, BR Ramesh, L. Saravanakumar, and B. Durga Prasad. "Effects of combustion chamber geometry on combustion characteristics of a DI diesel engine fueled with calophyllum inophyllum methyl ester." Journal of the Energy Institute 90, no. 1 (2017): 82-100.
[17] Brown, Julie Elizabeth, and Kevin Jeffrey Cox. "Measurement of Laminar Burning Velocity of Methane-Air Mixtures Using a Slot and Bunsen Burner." (2008).