Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 57, No. 2, May 2019, Pages 148-157

Adi Winarta1, Nandy Putra1,2,*, Raldy Artono Koestoer2, Agus Sunjarianto Pamitran2, Imansyah Ibnu Hakim1,2

1 Applied Heat Transfer Research Group, Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Jawa Barat 16424, Indonesia
2 Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Jawa Barat 16424, Indonesia
*Corresponding author: nandyputra@eng.ui.ac.id

Cite this article
MLA
Ibrahim Gamiye, Bouh, et al. "Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57.2 (2019): 148-157.
APA

Ibrahim Gamiye, B., Md. Zahangir, A., Nassereldeen, A. K., & Amina, M. A.(2019). Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57(2), 148-157.
Chicago
Ibrahim Gamiye Bouh, Md. Zahangir Alam, Nassereldeen Ahmed Kabbashi, and Amina Mohamed Ali."Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 57, no. 2 (2019): 148-157.
Harvard
Ibrahim Gamiye, B., Md. Zahangir, A., Nassereldeen, A.K., Amina, M.A., 2019. Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57(2), pp. 148-157.
Vancouver

Ibrahim Gamiye B, Md. Zahangir A, Nassereldeen AK, Amina MA. Heat Transfer Performance of Oscillating Heat Pipe with Ethanol and Methanol Working Fluid with Different Inclinations for Heat Recovery Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2019;57(2): 148-157.

KEYWORDS

Oscillating heat pipe; Inclinations; heat recovery; methanol; ethanol

ABSTRACT

In this paper, the experimentally research about the heat transfer characteristic of the OHP using methanol and ethanol working fluid for heat recovery implementation. The OHP was manufactured with leff of approximately 500 mm, which is not typically used in previous OHP data experimental tests. The results of this experimental data will provide more experimental data for the characteristic behaviour of PHP as heat recovery design. It was found that methanol working fluid has a lower temperature difference between evaporator and condenser which is lower than ethanol. There was no significant difference in changes in methanol inclination and OHP ethanol to the phenomenon of temperature fluctuations that occur in the initial heat supply. The increase in heat supply increases the thermal conductivity of OHP in all working fluids and inclination. In the average initial heat supply, effective thermal conductivity ranged from 844.5 to 1100.43 W/mK. Ethanol in the 60° inclination has the highest thermal conductivity in the initial heat supply. At a maximum heat supply (76 watt), methanol at 90° inclination has a maximum thermal conductivity of 13,586 W/mK or 35.2 times solid thermal copper conductivity. Overall, OHP Methanol has the capability of heat transfer better than ethanol.

REFERENCES

[1] Zhang, Yuwen, and Amir Faghri. "Advances and unsolved issues in pulsating heat pipes." Heat Transfer Engineering 29, no. 1 (2008): 20-44.
[2] Han, Xiaohong, Xuehui Wang, Haoce Zheng, Xiangguo Xu, and Guangming Chen. "Review of the development of pulsating heat pipe for heat dissipation." Renewable and Sustainable Energy Reviews 59 (2016): 692-709.
[3] Nikolayev, Vadim S. "A dynamic film model of the pulsating heat pipe." Journal of Heat Transfer 133, no. 8 (2011): 081504.
[4] Xu, J. L., Y. X. Li, and T. N. Wong. "High speed flow visualization of a closed loop pulsating heat pipe." International Journal of Heat and Mass Transfer 48, no. 16 (2005): 3338-3351.
[5] Khandekar, Sameer, Anant Prasad Gautam, and Pavan K. Sharma. "Multiple quasi-steady states in a closed loop pulsating heat pipe." International Journal of Thermal Sciences 48, no. 3 (2009): 535-546.
[6] Famouri, Mehdi, Gerardo Carbajal, and Chen Li. "Transient analysis of heat transfer and fluid flow in a polymer-based Micro Flat Heat Pipe with hybrid wicks." International Journal of Heat and Mass Transfer 70 (2014): 545-555.
[7] Qin, Yap Zi, Amer Nordin Darus, Che Sidik, and Nor Azwadi. "Numerical analysis on natural convection heat transfer of a heat sink with cylindrical pin fin. "J. Adv. Res. Fluid Mech. Therm. Sci 2, no. 1 (2014) : 13-22.
[8] Jamil, M., N. C. Sidik, and MNAW Muhammad Yazid. "Thermal performance of thermosyphon evacuated tube solar collector using TiO2/water nanofluid." J. Adv. Res. Fluid Mech. Therm. Sci 20, no. 1 (2016): 12-29.
[9] S. Muhammaddiyah, A. Winarta, and N. Putra, "Experimental Study of Heat Pipe Heat Exchanger Multi Fin for Energy Efficiency Effort in Operating Room Air System," International Journal of Technology 9, (2018) : 422-429.
[10] Putra, Nandy Setiadi Djaya, Trisno Anggoro, and Adi Winarta. "Experimental Study of Heat Pipe Heat Exchanger in Hospital HVAC System for Energy Conservation." International Journal on Advanced Science, Engineering and Information Technology 7, no. 3 (2017): 871-877.
[11] Tang, Xin, Lili Sha, Hua Zhang, and Yonglin Ju. "A review of recent experimental investigations and theoretical analyses for pulsating heat pipes." Frontiers in Energy 7, no. 2 (2013): 161-173.
[12] Taft, Brent S., Andrew D. Williams, and Bruce L. Drolen. "Review of pulsating heat pipe working fluid selection." Journal of Thermophysics and Heat Transfer 26, no. 4 (2012): 651-656.
[13] Xian, Haizhen, Yongping Yang, Dengying Liu, and Xiaoze Du. "Heat transfer characteristics of oscillating heat pipe with water and ethanol as working fluids." Journal of Heat Transfer132, no. 12 (2010): 121501.
[14] Lin, Zirong, Shuangfeng Wang, Jinjian Chen, Jiepeng Huo, Yanxin Hu, and Winston Zhang. "Experimental study on effective range of miniature oscillating heat pipes." Applied Thermal Engineering 31, no. 5 (2011): 880-886.
[15] Rittidech, S., N. Pipatpaiboon, and S. Thongdaeng. "Thermal performance of horizontal closed-loop oscillating heat-pipe with check valves." Journal of mechanical science and technology 24, no. 2 (2010): 545-550.
[16] Naik, Rudra, Venugopal Varadarajan, G. Pundarika, and K. Rama Narasimha. "Experimental investigation and performance evaluation of a closed loop pulsating heat pipe." (2013): 267-275.
[17] Tong, B. Y., T. N. Wong, and K. T. Ooi. "Closed-loop pulsating heat pipe." Applied thermal engineering 21, no. 18 (2001): 1845-1862.
[18] Saha, Manabendra, C. M. Feroz, F. Ahmed, and T. Mujib. "Thermal performance of an open loop closed end pulsating heat pipe." Heat and mass transfer 48, no. 2 (2012): 259-265.
[19] Akachi, H. "Structure of a heat pipe. US Patent 4,921,041 (1990)."
[20] Arab, M., M. Soltanieh, and M. B. Shafii. "Experimental investigation of extra-long pulsating heat pipe application in solar water heaters." Experimental thermal and fluid science42 (2012): 6-15.
[21] Yang, Yongping, Haizhen Xian, Dengying Liu, Chuanbao Chen, and Xiaoze Du. "Investigation on the feasibility of oscillating-flow heat pipe applied in the solar collector." International Journal of Green Energy 6, no. 5 (2009): 426-436.
[22] Winarta, Adi, Nandy Putra, and Fadli Bakhtiar. "Thermal performance of oscillating heat pipe with ethanol/methanol for heat recovery application design J." International Journal on Advanced Science, Engineering and Information Technology7, no. 4 (2017): 1268-1274.
[23] Mahajan, Govinda, Heejin Cho, Scott M. Thompson, Harrison Rupp, and Kevin Muse. "Oscillating heat pipes for waste heat recovery in HVAC systems." In ASME 2015 International Mechanical Engineering Congress and Exposition, pp. V08BT10A003-V08BT10A003. American Society of Mechanical Engineers, 2015.
[24] Kargarsharifabad, H., S. Jahangiri Mamouri, M. B. Shafii, and M. Taeibi Rahni. "Experimental investigation of the effect of using closed-loop pulsating heat pipe on the performance of a flat plate solar collector." Journal of Renewable and Sustainable Energy 5, no. 1 (2013): 013106.