Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 57, No. 2, May 2019, Pages 228-250

Thamir Khalil Ibrahim1,*, Mohammed Kamil Mohammed1, Wadhah Hussein Abdulrazzaq Al Doori1, Ahmed Tawfeeq Al-Sammarraie3, Firdaus Basrawi4

1 Department of Mechanical Engineering, Tikrit University, Tikrit, Iraq
2 Department of Mechanical and Nuclear Engineering, University of Sharjah, United Arab Emirates
3 Department of Mechanical Engineering, University of California, Riverside, CA 92521, USA
4 Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pahang, Malaysia
*Corresponding author: thamirmathcad@yahoo.com

Cite this articleMLA
Thamir Khalil, Ibrahim, et al. "Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57.2 (2019): 228-250.
APA
Thamir Khalil, I., Mohammed Kamil, M., Wadhah Hussein Abdulrazzaq, A. D., Ahmed Tawfeeq, A., & Firdaus, B.(2019). Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57(2), 228-250.
Chicago
Thamir Khalil Ibrahim, Mohammed Kamil Mohammed, Wadhah Hussein Abdulrazzaq Al Doori, Ahmed Tawfeeq Al-Sammarraie, and Firdaus Basrawi."Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 57, no. 2 (2019): 228-250.
Harvard
Thamir Khalil, I., Mohammed Kamil, M., Wadhah Hussein Abdulrazzaq, A.D., Ahmed Tawfeeq, A., Firdaus, B., 2019. Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 57(2), pp. 228-250.
Vancouver
Thamir Khalil I, Mohammed Kamil M, Wadhah Hussein Abdulrazzaq AD, Ahmed Tawfeeq A, &Firdau B. Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2019;57(2): 228-250.

KEYWORDS

Gas turbines; power plant; strategy; intercooler; regenerative; reheat

ABSTRACT

In this study, a comprehensive review of previous studies on GT power plants was conducted. The recent decades have witnessed several studies on the modelling and simulation of GT performance. This review concentrated on a simple cycle GT power plant (GTPP) with a 2-shaft, regenerative, reheat, intercooler, complex cycle GT with effect intercooler, regenerative and reheat. Further reviews focused on the influence of operating conditions on the performance of GTPP with more emphasis on the complex and simple cycles of the GT. Finally, the technical review focused on the improvement of the performance of the GTPP. However, information can be found on the assessment of the performance of GTPPs, especially, for GTPP operation in both ambient conditions and complex configurations. This review adopted a systematic approach to ensure that this study can be conducted properly to contribute to the existing information in this field.

REFERENCES

[1] E. Jeffs, Generating power at high efficiency: Combined cycle technology for sustainable energy production, Elsevier, 2008.
[2] A. Razak, Industrial gas turbines: performance and operability, Elsevier, 2007.
[3] Olumayegun, Olumide, Meihong Wang, and Greg Kelsall. "Closed-cycle gas turbine for power generation: A state-of-the-art review." Fuel 180 (2016): 694-717.
[4] Alklaibi, A. M., M. N. Khan, and W. A. Khan. "Thermodynamic analysis of gas turbine with air bottoming cycle." Energy 107 (2016): 603-611.
[5] Bartnik, Ryszard, and Zbigniew Buryn. Conversion of coal-fired power plants to cogeneration and combined-cycle: thermal and economic effectiveness. Springer Science & Business Media, 2011.
[6] Dincer, Ibrahim, Marc A. Rosen, and Calin Zamfirescu. "Exergetic performance analysis of a gas turbine cycle integrated with solid oxide fuel cells." Journal of Energy Resources Technology 131, no. 3 (2009): 032001.
[7] Nakamura, Hiromi, Takehiko Takahashi, Norio Narazaki, Kazuo Yamamoto, and Norio Sayama. "Regenerative gas turbine cycle." U.S. Patent 4,653,268, issued March 31, 1987.
[8] Ibrahim, Thamir K., Firdaus Basrawi, Omar I. Awad, Ahmed N. Abdullah, G. Najafi, Rizlman Mamat, and F. Y. Hagos. "Thermal performance of gas turbine power plant based on exergy analysis." Applied thermal engineering 115 (2017): 977-985.
[9] Awad, Omar I., Rizalman Mamat, Thamir K. Ibrahim, Maurice Kettner, K. Kadirgama, A. M. Leman, and A. I. M. Saiful. "Effects of fusel oil water content reduction on fuel properties, performance and emissions of SI engine fueled with gasoline-fusel oil blends." Renewable energy 118 (2018): 858-869.
[10] Ibrahim, Thamir K., M. M. Rahman, and Ahmed N. Abdalla. "Improvement of gas turbine performance based on inlet air cooling systems: A technical review." International journal of physical sciences 6, no. 4 (2011): 620-627.
[11] Rahman, M. M., Thamir K. Ibrahim, and Ahmed N. Abdalla. "Thermodynamic performance analysis of gas-turbine power-plant." International Journal of Physical Sciences 6, no. 14 (2011): 3539-3550.
[12] Ibrahim, Thamir K., M. M. Rahman, and Ahmed N. Abdalla. "Gas turbine configuration for improving the performance of combined cycle power plant." Procedia Engineering 15 (2011): 4216-4223.
[13] Rahman, M. M., Thamir K. Ibrahim, K. Kadirgama, R. Mamat, and Rosli A. Bakar. "Influence of operation conditions and ambient temperature on performance of gas turbine power plant." In Advanced Materials Research, vol. 189, pp. 3007-3013. Trans Tech Publications, 2011.
[14] Aker, G. F., and H. I. H. Saravanamuttoo. "Predicting gas turbine performance degradation due to compressor fouling using computer simulation techniques." Journal of engineering for gas turbines and power 111, no. 2 (1989): 343-350.
[15] Ragland, T. L. "Industrial gas turbine performance uprates: Tips, tricks, and traps." Journal of engineering for gas turbines and power 120, no. 4 (1998): 727-734.
[16] Taniguchi, Hiroshi, Sigehiro Miyamae, Norio Arai, and Noam Lior. "Power generation analysis for high-temperature gas turbine in thermodynamic process." Journal of Propulsion and Power 16, no. 4 (2000): 557-561.
[17] Allouis, C., A. Amoresano, G. Langella, V. Niola, and G. Quaremba. "Characterization of gas turbine burner instabilities by wavelet analysis of infrared images." Experimental Thermal and Fluid Science 73 (2016): 94-100.
[18] Balevic, David, Steven Hartman, and Ross Youmans. "Heavy-duty gas turbine operating and maintenance considerations." GE Energy, Atlanta, GA (2010).
[19] Ibrahim, Thamir K., Mohammed K. Mohammed, Omar I. Awad, Rizalman Mamat, and M. Kh Abdolbaqi. "Thermal and Economic Analysis of Gas Turbine Using Inlet Air Cooling System." In MATEC Web of Conferences, vol. 225, p. 01020. EDP Sciences, 2018.
[20] Awad, Omar I., Rizalman Mamat, M. M. Noor, Thamir K. Ibrahim, I. M. Yusri, and A. F. Yusop. "The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review." Journal of the Energy Institute 91, no. 1 (2018): 19-32.
[21] Awad, Omar I., R. Mamat, Thamir K. Ibrahim, Ftwi Y. Hagos, M. M. Noor, I. M. Yusri, and A. M. Leman. "Calorific value enhancement of fusel oil by moisture removal and its effect on the performance and combustion of a spark ignition engine." Energy conversion and management 137 (2017): 86-96.
[22] Sullerey, R. K., and Ankur Agarwal. "Performance improvement of gas turbine cycles." International Journal of Turbo and Jet Engines 25, no. 3 (2008): 209-220.
[23] Bade, Mukund H., and Santanu Bandyopadhyay. "Analysis of gas turbine integrated cogeneration plant: Process integration approach." Applied Thermal Engineering 78 (2015): 118-128.
[24] Boyce, Meherwan P. Gas turbine engineering handbook. Elsevier, 2011.
[25] Liu, Mingxi, Yang Shi, and Fang Fang. "Combined cooling, heating and power systems: A survey." Renewable and Sustainable Energy Reviews 35 (2014): 1-22.
[26] Basrawi, Firdaus, Thamir K. Ibrahim, Khairul Habib, and Takanobu Yamada. "Effect of operation strategies on the economic and environmental performance of a micro gas turbine trigeneration system in a tropical region." Energy 97 (2016): 262-272.
[27] Basrawi, Firdaus, Izwan Ismail, Thamir Khalil Ibrahim, Daing Mohamad Nafiz Daing Idris, and Shahrani Anuar. "A study on the power generation potential of mini wind turbine in east coast of Peninsular Malaysia." In AIP Conference Proceedings, vol. 1826, no. 1, p. 020023. AIP Publishing, 2017.
[28] Fischer, Willibald J., Wolfgang Winter, and Joergen Kroemeke. "SCC5-8000H 1S."
[29] Mohammed, Mohammed Kamil, Omar I. Awad, M. M. Rahman, G. Najafi, Firdaus Basrawi, Ahmed N. Abd Alla, and Rizalman Mamat. "The optimum performance of the combined cycle power plant: A comprehensive review." Renewable and Sustainable Energy Reviews 79 (2017): 459-474.
[30] De Sa, Ashley, and Sarim Al Zubaidy. "Gas turbine performance at varying ambient temperature." Applied Thermal Engineering 31, no. 14-15 (2011): 2735-2739.
[31] Kim, Kyoung Hoon, Hyung-Jong Ko, and Horacio Perez-Blanco. "Analytical modeling of wet compression of gas turbine systems." Applied Thermal Engineering 31, no. 5 (2011): 834-840.
[32] Kim, Tong Seop, and Sung Hoon Hwang. "Part load performance analysis of recuperated gas turbines considering engine configuration and operation strategy." Energy 31, no. 2-3 (2006): 260-277.
[33] Moran, Michael J., Howard N. Shapiro, Daisie D. Boettner, and Margaret B. Bailey. Fundamentals of engineering thermodynamics. John Wiley & Sons, 2010.
[34] Ibrahim, Thamir K., and M. M. Rahman. "Effects of isentropic efficiency and enhancing strategies on gas turbine performance." Journal of Mechanical Engineering and Sciences 4 (2013): 383-96.
[35] Ibrahim, Thamir K., M. M. Rahman, Obed M. Ali, Firdaus Basrawi, and Rizalman Mamat. "Optimum performance enhancing strategies of the gas turbine based on the effective temperatures." In MATEC Web of Conferences, vol. 38, p. 01002. EDP Sciences, 2016.
[36] Wu, Chih. Thermodynamics and heat powered cycles: a cognitive engineering approach. Nova Publishers, 2007.
[37] Boles, M., and Y. Cengel. "An Engineering Approach." New York: McGraw-Hil l Education (2014).
[38] Basrawi, Firdaus, Thamir K. Ibrahim, Surendran S. Sathiyaseelan, and A. A. Razak. "Experimental Investigation on Performance of Solar-Powered Attic Ventilation." In Sustainable Thermal Power Resources Through Future Engineering, pp. 1-19. Springer, Singapore, 2019.
[39] J.H. Horlock, D.T. Watson, T.V. Jones. "Limitations on Gas Turbine Performance Imposed by Large Turbine Cooling Flows." Journal of Engineering for Gas Turbines and Power 123, no. 3 (2001): 487-494.
[40] Horlock, John H. Advanced gas turbine cycles: a brief review of power generation thermodynamics. Elsevier, 2013.
[41] Zhang, Na, and Ruixian Cai. "Analytical solutions and typical characteristics of part-load performances of single shaft gas turbine and its cogeneration." Energy Conversion and Management 43, no. 9-12 (2002): 1323-1337.
[42] Ibrahim, Thamir K. "The Life cycle assessments of gas turbine using inlet air cooling system." Tikrit Journal of Engineering Sciences 22, no. 1 (2015): 69-75.
[43] Ibrahim, Thamir K., and M. M. Rahman. "Optimum performance improvements of the combined cycle based on an intercooler–reheated gas turbine." Journal of Energy Resources Technology 137, no. 6 (2015): 061601.
[44] Najjar, Yousef SH. "Enhancement of performance of gas turbine engines by inlet air cooling and cogeneration system." Applied Thermal Engineering 16, no. 2 (1996): 163-173.
[45] Najjar, Yousef SH. "Efficient use of energy by utilizing gas turbine combined systems." Applied Thermal Engineering21, no. 4 (2001): 407-438.
[46] Kim, J. H., T. S. Kim, J. L. Sohn, and S. T. Ro. "Comparative analysis of off-design performance characteristics of single and two shaft industrial gas turbines." In ASME Turbo Expo 2002: Power for Land, Sea, and Air, pp. 509-516. American Society of Mechanical Engineers, 2002.
[47] Kim, Kyoung Hoon, and Horacio Perez-Blanco. "Potential of regenerative gas-turbine systems with high fogging compression." Applied Energy 84, no. 1 (2007): 16-28.
[48] Kim, T. S., and S. T. Ro. "Power augmentation of combined cycle power plants using cold energy of liquefied natural gas." Energy 25, no. 9 (2000): 841-856.
[49] Najjar, Yousef SH, Abdullah S. Alghamdi, and Mohammad H. Al-Beirutty. "Comparative performance of combined gas turbine systems under three different blade cooling schemes." Applied Thermal Engineering 24, no. 13 (2004): 1919-1934.
[50] Haglind, Fredrik. "Variable geometry gas turbines for improving the part-load performance of marine combined cycles–gas turbine performance." Energy 35, no. 2 (2010): 562-570.
[51] F Haglind, Fredrik. "Variable geometry gas turbines for improving the part-load performance of marine combined cycles–Combined cycle performance." Applied Thermal Engineering 31, no. 4 (2011): 467-476.
[52] Al-Sammarraie, Ahmed Tawfeeq Ahmed, Raaid Rashad Jassem, and Thamir K. Ibrahim. "Mixed convection heat transfer in inclined tubes with constant heat flux." European Journal of Scientific Research 97, no. 1 (2013): 144-158.
[53] Zaidan, Maki H., Aadel AR Alkumait, and Thamir K. Ibrahim. "Assessment of heat transfer and fluid flow characteristics within finned flat tube." Case studies in thermal engineering 12 (2018): 557-562.
[54] Mhamuad, Aziz7 M., Thamir Kh Ibrahim, and Raid R. Jasim. "Determination of the temperature distribution the perforated fins under." Tikrit Journal of Engineering Sciences 15, no. 2 (2008): 63-78.
[55] Ibrahim, Thamir K., and Marwah N. Mohammed. "Thermodynamic evaluation of the performance of a combined cycle power plant." International Journal of Energy Science and Engineering 1 (2015): 11.
[56] Ibrahim, Thamir K., and M. M. Rahman. "Parametric simulation of triple-pressure reheat combined cycle: A case study." Advanced Science Letters 13, no. 1 (2012): 263-268.
[57] Rahman, M. M., Thamir K. Ibrahim, M. Y. Taib, M. M. Noor, and Rosli A. Bakar. "Thermal analysis of open-cycle regenerator gas-turbine power-plant." Fuel 200, no. 4 (2010): 2.
[58] Ibrahim, Thamir K., and Mustafizur M. Rahman. "Study on effective parameter of the triple-pressure reheat combined cycle performance." Thermal Science 17, no. 2 (2013): 497-508.
[59] Moran, Michael J., Howard N. Shapiro, Bruce R. Munson, and David P. DeWitt. "Introduction to thermal systems engineering." Thermodynamics, Fluid Mechanics, and Heat Transfer (2003).
[60] Khaljani, M., R. Khoshbakhti Saray, and K. Bahlouli. "Comprehensive analysis of energy, exergy and exergo-economic of cogeneration of heat and power in a combined gas turbine and organic Rankine cycle." Energy Conversion and Management 97 (2015): 154-165.
[61] Aminov, Zarif, Nobukazu Nakagoshi, Tran Dang Xuan, Osamu Higashi, and Khusniddin Alikulov. "Evaluation of the energy efficiency of combined cycle gas turbine. Case study of Tashkent thermal power plant, Uzbekistan." Applied Thermal Engineering 103 (2016): 501-509.
[62] Awad, Omar I., Rizalman Mamat, Thamir K. Ibrahim, Obed M. Ali, K. Kadirgama, and A. M. Leman. "Performance and combustion characteristics of an SI engine fueled with fusel oil-gasoline at different water content." Applied Thermal Engineering 123 (2017): 1374-1385.
[63] Alkumait, Aadel Abdul Razzaq, Maki Haj Zaidan, and Thamir Khalil Ibrahim. "Numerical Investigation of Forced Convection Flow over Backward Facing Step Affected By A Baffle Position." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 52, no. 1 (2018): 33-45.
[64] A. Zwebek, P. Pilidis. "Degradation Effects on Combined Cycle Power Plant Performance—Part I: Gas Turbine Cycle Component Degradation Effects." Journal of Engineering for Gas Turbines and Power 125, no. 3 (2003): 651-657.
[65] A. Zwebek, P. Pilidis. "Degradation Effects on Combined Cycle Power Plant Performance—Part III: Gas and Steam Turbine Component Degradation Effects." Journal of Engineering for Gas Turbines and Power 126, no. 2 (2004): 306-315.
[66] Zwebek, A., and P. Pilidis. "Degradation Effects on Combined Cycle Power Plant Performance—Part II: Steam Turbine Cycle Component Degradation Effects." Journal of engineering for gas turbines and power 125, no. 3 (2003): 658-663.
[67] Singhal, Subhash C. "Solid oxide fuel cells for stationary, mobile, and military applications." Solid State Ionics 152 (2002): 405-410.
[68] Giampaolo, Tony. Gas turbine handbook: principles and practice. Fairmont Press, 2002.
[69] Binotti, Marco, Paolo De Giorgi, David Sanchez, and Giampaolo Manzolini. "Comparison of different strategies for heliostats aiming point in cavity and external tower receivers." Journal of Solar Energy Engineering 138, no. 2 (2016): 021008.
[70] El-Sayed, Ahmed F. Aircraft propulsion and gas turbine engines. CRC press, 2017.
[71] Walsh, Philip P., and Paul Fletcher. Gas turbine performance. John Wiley & Sons, 2004.
[72] Ibrahim, Thamir K., Mohammed Kamil Mohammed, Omar I. Awad, Ahmed N. Abdalla, Firdaus Basrawi, Marwah N. Mohammed, G. Najafi, and Rizalman Mamat. "A comprehensive review on the exergy analysis of combined cycle power plants." Renewable and Sustainable Energy Reviews 90 (2018): 835-850.
[73] Salimpour, Mohammad Reza, Amin Ahmadzadeh, and Ahmed T. Al-Sammarraie. "Comparative investigation on the exergoeconomic analysis of solar-driven ejector refrigeration systems." International Journal of Refrigeration99 (2019): 80-93.
[74] Al-Jethelah, Manar SM, Ahmed Al-Sammarraie, Syeda H. Tasnim, Shohel Mahmud, and Animesh Dutta. "Effect of convection heat transfer on thermal energy storage unit." Open Physics 16, no. 1 (2018): 861-867.
[75] Wilson, David Gordon, and Theodosios Korakianitis. The design of high-efficiency turbomachinery and gas turbines. MIT press, 2014.
[76] Mohammed, Mohammed K., M. Kh Abdolbaqi, Thamir K. Ibrahim, Rizalman Bin Mamat, and Omar I. Awad. "Experimental and Numerical investigation of Heat transfer enhancement using Al2O3-Ethylene Glycol/Water nanofluids in straight channel." In MATEC Web of Conferences, vol. 225, p. 01019. EDP Sciences, 2018.
[77] Mohajer, A., A. Noroozi, and S. Norouzi. "Optimization of diverter box configuration in a V94. 2 gas turbine exhaust system using numerical simulation." World Academy of Science, Engineering and Technology 57 (2009): 566-571.
[78] Brandt, D. E., and R. R. Wesorick. "GE gas turbine design philosophy." GER-3434, General Electric (1994).
[79] Valdés, Manuel, and José L. Rapún. "Optimization of heat recovery steam generators for combined cycle gas turbine power plants." Applied Thermal Engineering 21, no. 11 (2001): 1149-1159.
[80] Valdes, Manuel, Antonio Rovira, and Ma Dolores Duran. "Influence of the heat recovery steam generator design parameters on the thermoeconomic performances of combined cycle gas turbine power plants." International Journal of Energy Research 28, no. 14 (2004): 1243-1254.
[81] Bilgen, E. "Exergetic and engineering analyses of gas turbine based cogeneration systems." Energy 25, no. 12 (2000): 1215-1229.
[82] Ibrahim, Thamir K., and M. M. Rahman. "Effects of isentropic efficiency and enhancing strategies on gas turbine performance." Journal of Mechanical Engineering and Sciences 4 (2013): 383-96.
[83] Saravanamuttoo, Herbert IH, Gordon Frederick Crichton Rogers, and Henry Cohen. Gas turbine theory. Pearson Education, 2001.
[84] Ibrahim, Thamir K., and M. M. Rahman. "Parametric study of a two-shaft gas turbine cycle model of power plant." In IOP Conference Series: Materials Science and Engineering, vol. 36, no. 1, p. 012024. IOP Publishing, 2012.
[85] Soares, Claire. Gas turbines: a handbook of air, land and sea applications. Elsevier, 2011.
[86] Heppenstall, T. "Advanced gas turbine cycles for power generation: a critical review." Applied Thermal Engineering18, no. 9-10 (1998): 837-846.
[87] Grange, B., C. Dalet, Q. Falcoz, A. Ferrière, and G. Flamant. "Impact of thermal energy storage integration on the performance of a hybrid solar gas-turbine power plant." Applied Thermal Engineering 105 (2016): 266-275.
[88] Noroozian, Afsaneh, and Mokhtar Bidi. "An applicable method for gas turbine efficiency improvement. Case study: Montazar Ghaem power plant, Iran." Journal of Natural Gas Science and Engineering 28 (2016): 95-105.
[89] Edris, M. "Comparison between single-shaft and mutli-shaft gas fired 800 MWel combined cycle power plant." Applied Thermal Engineering 30, no. 16 (2010): 2339-2346.
[90] Baina, Fabiola, Anders Malmquist, Lucio Alejo, and Torsten H. Fransson. "Effect of the fuel type on the performance of an externally fired micro gas turbine cycle." Applied Thermal Engineering 87 (2015): 150-160.
[91] Harun, Nor Farida, David Tucker, and Thomas A. Adams II. "Impact of fuel composition transients on SOFC performance in gas turbine hybrid systems." Applied energy164 (2016): 446-461.
[92] Antonanzas, J., E. Jimenez, J. Blanco, and F. Antonanzas-Torres. "Potential solar thermal integration in Spanish combined cycle gas turbines." Renewable and Sustainable Energy Reviews 37 (2014): 36-46.
[93] Antonanzas, J., M. Alia-Martinez, F. J. Martinez-de-Pison, and F. Antonanzas-Torres. "Towards the hybridization of gas-fired power plants: a case study of Algeria." Renewable and Sustainable Energy Reviews 51 (2015): 116-124.
[94] Al-Hamdan, Qusai Z., and Munzer S. Ebaid. "Modeling and simulation of a gas turbine engine for power generation." Journal of Engineering for Gas Turbines and Power 128, no. 2 (2006): 302-311.
[95] Al-Doori, Wadhah Hussein Abdul Razzaq. "In?uence of Steam Injection on the Performance of Combined Cycle Power Plant." Journal of Engineering and Applied Sciences6, no. 6 (2011): 390-396.
[96] Barsali, Stefano, A. De Marco, Romano Giglioli, Giulia Ludovici, and A. Possenti. "Dynamic modelling of biomass power plant using micro gas turbine." Renewable Energy80 (2015): 806-818.
[97] Barsali, Stefano, A. De Marco, Romano Giglioli, Giulia Ludovici, and A. Possenti. "Dynamic modelling of biomass power plant using micro gas turbine." Renewable Energy80 (2015): 806-818.
[98] Balamurugan, S., N. Janarthanan, and KRM Vijaya Chandrakala. "Small and large signal modeling of heavy duty gas turbine plant for load frequency control." International Journal of Electrical Power & Energy Systems79 (2016): 84-88.
[99] Tiwari, A. K., Mohd Islam, M. M. Hasan, and M. N. Khan. "Thermodynamic simulation of performance of combined cycle with variation of cycle peak temperature & specific heat ratio of working fluid." International Journal of Engineering Studies 2, no. 3 (2010): 307-316.
[100] Poullikkas, Andreas. "An overview of current and future sustainable gas turbine technologies." Renewable and Sustainable Energy Reviews 9, no. 5 (2005): 409-443.
[101] Basrawi, Firdaus, A. I. M. Al-Anati, Thamir K. Ibrahim, Mohd Hazwan Yusof, A. A. Razak, Shaharin Anuar Sulaiman, and Takanobu Yamada. "Theoretical Analysis on the Micro Gas Turbine Integrated Solar Farm for Power Output Stabilization." In MATEC Web of Conferences, vol. 225, p. 04012. EDP Sciences, 2018.
[102] Barzegar Avval, H., P. Ahmadi, A. R. Ghaffarizadeh, and M. H. Saidi. "Thermo?economic?environmental multiobjective optimization of a gas turbine power plant with preheater using evolutionary algorithm." International Journal of Energy Research 35, no. 5 (2011): 389-403.
[103] Ahmadi, Pouria, Ibrahim Dincer, and Marc A. Rosen. "Exergy, exergoeconomic and environmental analyses and evolutionary algorithm based multi-objective optimization of combined cycle power plants." Energy 36, no. 10 (2011): 5886-5898.
[104] Ehyaei, Mehdi A., Mojtaba Tahani, Pouria Ahmadi, and Mohammad Esfandiari. "Optimization of fog inlet air cooling system for combined cycle power plants using genetic algorithm." Applied Thermal Engineering 76 (2015): 449-461.
[105] Al-Taha, Wadhah H., and Hassan A. Osman. "Performance Analysis of a Steam Power Plant: A Case Study." In MATEC Web of Conferences, vol. 225, p. 05023. EDP Sciences, 2018.
[106] Farshi, L. Garooci, SM Seyed Mahmoudi, and A. H. Mosafa. "Improvement of simple and regenerative gas turbine using simple and ejector-absorption refrigeration." IUST International Journal of Engineering Science 19, no. 5-1 (2008): 127-136.
[107] Khaliq, Abdul, and Ibrahim Dincer. "Energetic and exergetic performance analyses of a combined heat and power plant with absorption inlet cooling and evaporative aftercooling." Energy 36, no. 5 (2011): 2662-2670.
[108] Farzaneh-Gord, Mahmood, and Mahdi Deymi-Dashtebayaz. "A new approach for enhancing performance of a gas turbine (case study: Khangiran refinery)." Applied Energy 86, no. 12 (2009): 2750-2759.
[109] Farzaneh-Gord, Mahmood, and Mahdi Deymi-Dashtebayaz. "Effect of various inlet air cooling methods on gas turbine performance." Energy 36, no. 2 (2011): 1196-1205.
[110] Basrawi, Firdaus, Thamir K. Ibrahim, Giok Chui Lee, Khairul Habib, and Hassan Ibrahim. "Effect of solar fraction on the economic and environmental performance of solar air-conditioning by adsorption chiller in a tropical region." Journal of Solar Energy Engineering 137, no. 6 (2015): 061009.
[111] Ibrahim, Thamir K., and M. M. Rahman. "Effects of cycle peak temperature ratio on the performance of combined cycle power plant." International Journal of Automotive & Mechanical Engineering 13, no. 2 (2016).
[112] Ibrahim, Thamir K., and M. M. Rahman. "Thermal impact of operating conditions on the performance of a combined cycle gas turbine." Journal of applied research and technology 10, no. 4 (2012): 567-577.
[113] Eveloy, Valérie, Peter Rodgers, and Linyue Qiu. "Hybrid gas turbine–organic Rankine cycle for seawater desalination by reverse osmosis in a hydrocarbon production facility." Energy Conversion and Management106 (2015): 1134-1148.
[114] Ibrahim, Thamir K., and M. M. Rahman. "Effect of compression ratio on performance of combined cycle gas turbine." International journal of energy engineering 2, no. 1 (2012): 9-14.
[115] Kakaras, E., A. Doukelis, and S. Karellas. "Compressor intake-air cooling in gas turbine plants." Energy 29, no. 12-15 (2004): 2347-2358.
[116] De Lucia, Maurizio, Carlo Lanfranchi, and Varmi Boggio. "Benefits of compressor inlet air cooling for gas turbine cogeneration plants." Journal of engineering for gas turbines and power 118, no. 3 (1996): 598-603.
[117] Kakaras, E., A. Doukelis, A. Prelipceanu, and S. Karellas. "Inlet air cooling methods for gas turbine based power plants." Journal of engineering for gas turbines and power128, no. 2 (2006): 312-317.
[118] Alhazmy, M. M., and Yousef SH Najjar. "Augmentation of gas turbine performance using air coolers." Applied thermal engineering 24, no. 2-3 (2004): 415-429.
[119] Arrieta, Felipe R. Ponce, and Electo E. Silva Lora. "Influence of ambient temperature on combined-cycle power-plant performance." Applied Energy 80, no. 3 (2005): 261-272.
[120] Erdem, Hasan Hüseyin, and Süleyman Hakan Sevilgen. "Case study: Effect of ambient temperature on the electricity production and fuel consumption of a simple cycle gas turbine in Turkey." Applied Thermal Engineering26, no. 2-3 (2006): 320-326.
[121] Zhang, Guoqiang, Jiongzhi Zheng, Yongping Yang, and Wenyi Liu. "Thermodynamic performance simulation and concise formulas for triple-pressure reheat HRSG of gas–steam combined cycle under off-design condition." Energy conversion and management 122 (2016): 372-385.
[122] El Hadik, A. A. "The impact of atmospheric conditions on gas turbine performance." Journal of Engineering for Gas Turbines and Power 112, no. 4 (1990): 590-596.
[123] Ait-Ali, M. A. "Optimum power boosting of gas turbine cycles with compressor inlet air refrigeration." Journal of engineering for gas turbines and power 119, no. 1 (1997): 124-130.
[124] Kolev, N., K. Schaber, and D. Kolev. "A new type of a gas–steam turbine cycle with increased efficiency." Applied thermal engineering 21, no. 4 (2001): 391-405.
[125] Aklilu, B. T., and S. I. Gilani. "Mathematical modeling and simulation of a cogeneration plant." Applied Thermal Engineering 30, no. 16 (2010): 2545-2554.
[126] Basrawi, Firdaus, M. R. R. Chand, K. H. Koo, and Thamir K. Ibrahim. "Theoretical analysis on the economic performance of micro gas turbine-trigeneration system with different operation strategies for residential building in a tropical region." In MATEC Web of Conferences, vol. 38, p. 01003. EDP Sciences, 2016.
[127] Ust, Yasin, Feyyaz Arslan, Ibrahim Ozsari, and Mehmet Cakir. "Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria." Energy 90 (2015): 552-559.
[128] Boonnasa, Somkiat, Pichai Namprakai, and Terachun Muangnapoh. "Performance improvement of the combined cycle power plant by intake air cooling using an absorption chiller." Energy 31, no. 12 (2006): 2036-2046.
[129] Boonnasa, S., and P. Namprakai. "Sensitivity analysis for the capacity improvement of a combined cycle power plant (100–600 MW)." Applied Thermal Engineering 28, no. 14-15 (2008): 1865-1874.
[130] Mohanty, B., and G. Paloso Jr. "Enhancing gas turbine performance by intake air cooling using an absorption chiller." Heat recovery Systems and CHP 15, no. 1 (1995): 41-50.
[131] Bassily, Ashraf M. "Effects of evaporative inlet and aftercooling on the recuperated gas turbine cycle." Applied thermal engineering 21, no. 18 (2001): 1875-1890.
[132] Bassily, A. M. "Performance improvements of the intercooled reheat regenerative gas turbine cycles using indirect evaporative cooling of the inlet air and evaporative cooling of the compressor discharge." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 215, no. 5 (2001): 545-557.
[133] Bassily, A. M. "Enhancing the efficiency and power of the triple-pressure reheat combined cycle by means of gas reheat, gas recuperation, and reduction of the irreversibility in the heat recovery steam generator." Applied Energy 85, no. 12 (2008): 1141-1162.
[134] Khaliq, A., and S. C. Kaushik. "Thermodynamic performance evaluation of combustion gas turbine cogeneration system with reheat." Applied Thermal Engineering 24, no. 13 (2004): 1785-1795.
[135] Khaliq, Abdul, and Rajesh Kumar. "Thermodynamic performance assessment of gas turbine trigeneration system for combined heat cold and power production." Journal of Engineering for Gas Turbines and Power 130, no. 2 (2008): 024501.
[136] Badran, Omar Othman. "Gas-turbine performance improvements." Applied Energy 64, no. 1-4 (1999): 263-273.
[137] Sanjay, Y., Onkar Singh, and B. N. Prasad. "Energy and exergy analysis of steam cooled reheat gas–steam combined cycle." Applied Thermal Engineering 27, no. 17-18 (2007): 2779-2790.
[138] Sanjay. "Investigation of effect of variation of cycle parameters on thermodynamic performance of gas-steam combined cycle." Energy 36, no. 1 (2011): 157-167.
[139] Bassily, A. M. "Numerical cost optimization and irreversibility analysis of the triple-pressure reheat steam-air cooled GT commercial combined cycle power plants." Applied Thermal Engineering 40 (2012): 145-160.
[140] McDonald, Colin F., and David Gordon Wilson. "The utilization of recuperated and regenerated engine cycles for high-efficiency gas turbines in the 21st century." Applied Thermal Engineering 16, no. 8-9 (1996): 635-653.
[141] McDonald, Colin F., and Colin Rodgers. "Ceramic recuperator and turbine: The key to achieving a 40 percent efficient microturbine." In ASME Turbo Expo 2005: Power for Land, Sea, and Air, pp. 963-971. American Society of Mechanical Engineers, 2005.
[142] Kumari, Anupam. "Investigation of parameters affecting exergy and emission performance of basic and intercooled gas turbine cycles." Energy 90 (2015): 525-536.
[143] Shi, Xiaojun, and Defu Che. "Thermodynamic analysis of an LNG fuelled combined cycle power plant with waste heat recovery and utilization system." International journal of energy research 31, no. 10 (2007): 975-998.
[144] Chuang, Chia-Chin, and Deng-Chern Sue. "Performance effects of combined cycle power plant with variable condenser pressure and loading." Energy 30, no. 10 (2005): 1793-1801.
[145] Basha, Mehaboob, S. M. Shaahid, and Luai Al-Hadhrami. "Impact of fuels on performance and efficiency of gas turbine power plants." Energy Procedia 14 (2012): 558-565.
[146] Nadir, Mahmoud, Adel Ghenaiet, and Carlo Carcasci. "Thermo-economic optimization of heat recovery steam generator for a range of gas turbine exhaust temperatures." Applied Thermal Engineering 106 (2016): 811-826.
[147] Gülen, S. Can. "Second law analysis of integrated solar combined cycle power plants." Journal of Engineering for Gas Turbines and Power 137, no. 5 (2015): 051701.
[148] Ibrahim, Thamir K., and M. M. Rahman. "Effects of operation conditions on performance of a gas turbine power plant." In National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), pp. 135-144. 2010.
[149] Kurt, Hüseyin, Ziyaddin Recebli, and Engin Gedik. "Performance analysis of open cycle gas turbines." International Journal of Energy Research 33, no. 3 (2009): 285-294.
[150] Ibrahim, Thamir K., and M. M. Rahman. "Effects of isentropic efficiencies on the performance of combined cycle power plants." International Journal of Automotive & Mechanical Engineering 12 (2015).
[151] Sheikhbeigi, B., and M. B. Ghofrani. "Thermodynamic and environmental consideration of advanced gas turbine cycles with reheat and recuperator." International Journal of Environmental Science & Technology 4, no. 2 (2007): 253-262.
[152] Sayyaadi, Hoseyn, and Reza Mehrabipour. "Efficiency enhancement of a gas turbine cycle using an optimized tubular recuperative heat exchanger." Energy 38, no. 1 (2012): 362-375.
[153] Bhargava, R. K., M. Bianchi, A. De Pascale, G. Negri Di Montenegro, and A. Peretto. "Gas turbine based power cycles-a state-of-the-art review." In Challenges of power engineering and environment, pp. 309-319. Springer, Berlin, Heidelberg, 2007.
[154] Kaushik, S. C., H. Chandra, and A. Khaliq. "Thermal exergy optimisation for an irreversible cogeneration power plant." International Journal of Exergy 2, no. 3 (2005): 260-273.
[155] Ibrahim, Thamir K., M. M. Rahman, and Ahmed N. Abd Alla. "Study on the effective parameter of gas turbine model with intercooled compression process." Scientific Research and Essays 5, no. 23 (2010): 3760-3770.
[156] Al-Doori, Wadhah Hussein Abdul Razzaq. "Parametric performance of gas turbine power plant with effect intercooler." Modern Applied Science 5, no. 3 (2011): 173.
[157] Canière, Hugo, Arnout Willockx, Erik Dick, and Michel De Paepe. "Raising cycle efficiency by intercooling in air-cooled gas turbines." Applied Thermal Engineering 26, no. 16 (2006): 1780-1787.
[158] Boggia, Stefano, and Klaus Rüd. "Intercooled recuperated gas turbine engine concept." In 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, p. 4192. 2005.
[159] Cheng, Ching?Yang, and Cha'o?Kuang Chen. "Maximum power of an endoreversible intercooled Brayton cycle." International Journal of Energy Research 24, no. 6 (2000): 485-494.
[160] Yi, Yaofan, Ashok D. Rao, Jacob Brouwer, and G. Scott Samuelsen. "Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC–ICGT) hybrid cycle." Journal of Power Sources 132, no. 1-2 (2004): 77-85.
[161] Wang, W. H., L. G. Chen, F. R. Sun, and C. Wu. "Performance optimisation of open cycle intercooled gas turbine power plant with pressure drop irreversibilities." Journal of the Energy Institute 81, no. 1 (2008): 31-37.
[162] Farrell, William M., and Gary L. Leonard. "Intercooled gas turbine engine." U.S. Patent 5,553,448, issued September 10, 1996.
[163] Horner, Michael W. "Extracted, cooled, compressed/intercooled, cooling/combustion air for a gas turbine engine." U.S. Patent 6,050,080, issued April 18, 2000.
[164] Abdallah, H., B. Facchini, F. Danes, and J. De Ruyck. "Exergetic optimization of intercooled reheat chemically recuperated gas turbine." Energy conversion and management 40, no. 15-16 (1999): 1679-1686.
[165] Bassily, A. M. "Performance improvements of the intercooled reheat recuperated gas-turbine cycle using absorption inlet-cooling and evaporative after-cooling." Applied Energy 77, no. 3 (2004): 249-272.
[166] Chandra, H., A. Arora, S. C. Kaushik, A. Tripathi, and A. Rai. "Thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine on the basis of a new isentropic exponent." International Journal of Sustainable Energy 30, no. 2 (2011): 82-97.
[167] Yadav, R., Sunil Kumar Jumhare, Pradeep Kumar, and Samir Saraswati. "Thermodynamic analysis of intercooled gas-steam combined and steam injected gas turbine power plants." In ASME Turbo Expo 2004: Power for Land, Sea, and Air, pp. 731-738. American Society of Mechanical Engineers, 2004.
[168] Tyagi, S. K., G. M. Chen, Q. Wang, and S. C. Kaushik. "Thermodynamic analysis and parametric study of an irreversible regenerative-intercooled-reheat Brayton cycle." International Journal of Thermal Sciences 45, no. 8 (2006): 829-840.
[169] Awad, Omar I., R. Mamat, Thamir K. Ibrahim, Ali Thaeer Hammid, I. M. Yusri, Mohd Adnin Hamidi, Ali M. Humada, and A. F. Yusop. "Overview of the oxygenated fuels in spark ignition engine: Environmental and performance." Renewable and Sustainable Energy Reviews 91 (2018): 394-408.
[170] ?öhret, Yasin, Selcuk Ekici, Önder Altunta?, Arif Hepbasli, and T. Hikmet Karakoç. "Exergy as a useful tool for the performance assessment of aircraft gas turbine engines: A key review." Progress in Aerospace Sciences 83 (2016): 57-69.
[171] Wulff, A., and J. Hourmouziadis. "Technology review of aeroengine pollutant emissions." Aerospace science and technology 1, no. 8 (1997): 557-572.
[172] Cano-Andrade, Sergio, Michael R. Von Spakovsky, Alejandro Fuentes, Chiara Lo Prete, and Lamine Mili. "Upper Level of a Sustainability Assessment Framework for Power System Planning." Journal of Energy Resources Technology 137, no. 4 (2015): 041601.
[173] Ozcan, Mustafa. "Estimation of Turkey? s GHG emissions from electricity generation by fuel types." Renewable and Sustainable Energy Reviews 53 (2016): 832-840.
[174] Abdalla, Ahmed N., Omar I. Awad, Hai Tao, Thamir K. Ibrahim, Rizalman Mamat, and Ali Thaeer Hammid. "Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 41, no. 8 (2019): 931-947.
[175] Ibrahim, Thamir K., and M. M. Rahman. "Effective Parameters on Performance of Multipressure Combined Cycle Power Plants." Advances in Mechanical Engineering (Hindawi Publishing Corporation) (2014).
[176] Tsague, Louis, Thomas Tamo Tatietse, John Ngundam, and Joseph Tsogo. "Prediction of emissions in turbojet engines exhausts: relationship between nitrogen oxides emission index (EINOx) and the operational parameters." Aerospace science and technology 11, no. 6 (2007): 459-463.
[177] Mohapatra, Alok Ku. "Thermodynamic assessment of impact of inlet air cooling techniques on gas turbine and combined cycle performance." Energy 68 (2014): 191-203.
[178] Ghazikhani, Mohsen, I. Khazaee, and Ehsan Abdekhodaie. "Exergy analysis of gas turbine with air bottoming cycle." Energy 72 (2014): 599-607.
[179] Dellenback, Paul A. "Improved gas turbine efficiency through alternative regenerator configuration." Journal of Engineering for Gas Turbines and Power 124, no. 3 (2002): 441-446.
[180] Benato, Alberto, Anna Stoppato, and Stefano Bracco. "Combined cycle power plants: A comparison between two different dynamic models to evaluate transient behaviour and residual life." Energy conversion and management 87 (2014): 1269-1280.
[181] Dellenback, Paul A. "A reassessment of the alternative regeneration cycle." Journal of engineering for gas turbines and power 128, no. 4 (2006): 783-788.
[182] Hwang, Sung Hoon, Soo Hyoung Yoon, and Tong Seop Kim. "Design and off-design characteristics of the alternative recuperated gas turbine cycle with divided turbine expansion." Journal of engineering for gas turbines and power 129, no. 2 (2007): 428-435.
[183] Rahman, M. M., Thamir K. Ibrahim, M. Y. Taib, M. M. Noor, and Rosli A. Bakar. "Thermal analysis of open-cycle regenerator gas-turbine power-plant, World Academy of Science." Engineering and Technology Journal 68, (2010): 6.
[184] Goodarzi, M. "Comparative energy analysis on a new regenerative Brayton cycle." Energy Conversion and Management 120 (2016): 25-31.
[185] Herraiz, Laura, Dougal Hogg, Jim Cooper, Jon Gibbins, and Mathieu Lucquiaud. "Reducing water usage with rotary regenerative gas/gas heat exchangers in natural gas-fired power plants with post-combustion carbon capture." Energy 90 (2015): 1994-2005.
[186] Tao, Guisheng, Lingen Chen, and Fengrui Sun. "Exergoeconomic performance optimization for an endoreversible regenerative gas turbine closed-cycle cogeneration plant." Revista mexicana de física 55, no. 3 (2009): 192-200.
[187] Bannai, Masaaki, Akira Houkabe, Masahiko Furukawa, Takao Kashiwagi, Atsushi Akisawa, Takuya Yoshida, and Hiroyuki Yamada. "Development of efficiency-enhanced cogeneration system utilizing high-temperature exhaust-gas from a regenerative thermal oxidizer for waste volatile-organic-compound gases." Applied Energy 83, no. 9 (2006): 929-942.
[188] Erbay, L. Berrin, Selahattin Göktun, and Hasbi Yavuz. "Optimal design of the regenerative gas turbine engine with isothermal heat addition." Applied energy 68, no. 3 (2001): 249-264.
[189] Al-Sammarraie, Ahmed T., and Kambiz Vafai. "Heat transfer augmentation through convergence angles in a pipe." Numerical Heat Transfer, Part A: Applications 72, no. 3 (2017): 197-214.
[190] Salimpour, Mohammad Reza, Ahmed T. Al-Sammarraie, Azadeh Forouzandeh, and Mahsa Farzaneh. "Constructal design of circular multilayer microchannel heat sinks." Journal of Thermal Science and Engineering Applications11, no. 1 (2019): 011001.
[191] Ibrahim, Thamir K., Firdaus Basrawi, Marwah Noori Mohammed, and Hassan Ibrahim. "Effect of perforation area on temperature distribution of the rectangular fins under natural convection." ARPN Journal of Engineering and Applied Sciences 11, no. 10 (2016): 6371-6375.
[192] Bozza, Fabio, Maria Cristina Cameretti, and Raffaele Tuccillo. "Adapting the micro-gas turbine operation to variable thermal and electrical requirements." In ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, pp. 741-753. American Society of Mechanical Engineers, 2003.
[193] Oliveira, Luciana M., Marco AR Nascimento, and Gene?sio J. Menon. "The thermal impact of using syngas as fuel in the regenerator of regenerative gas turbine engine." In ASME Turbo Expo 2009: Power for Land, Sea, and Air, pp. 201-209. American Society of Mechanical Engineers, 2009.
[194] Kumar, N. Ravi, K. Rama Krishna, and AV Sita Rama Raju. "Performance improvement and exergy analysis of gas turbine power plant with alternative regenerator and intake air cooling." Energy Engineering 104, no. 3 (2007): 36-53.
[195] Kumar, Ravi N., and Rama K. Krishna. "Thermodynamic Analysis of Alternative Regenerator Gas Turbine Configuration based on Exergy." Journal of the Institution of Engineers(India), Part MC, Mechanical Engineering Division 87, no. 3 (2006): 47-51.
[196] A. Kumar, S. Kachhwaha, R. Mishra. "Thermodynamic analysis of a regenerative gas turbine cogeneration plant." Journal of scientific and Industrial Research 69, no. 3 (2010): 225-231.
[197] Chen, Lingen, Fengrui Sun, Chih Wu, and R. L. Kiang. "Theoretical analysis of the performance of a regenerative closed Brayton cycle with internal irreversibilities." Energy Conversion and Management 38, no. 9 (1997): 871-877.
[198] Facchini, Bruno. "New prospects for the use of regeneration in gas turbine cycles." In the 7 th Congress & Exposition on Gas Turbines in Cogeneration and Utility Industrial and Independent Power Generation, Bournemouth, Engl, 09/21-23/93, pp. 263-269. 1993.
[199] Facchini, B., and S. Sguanci. RE Cycle: A system for good off-design performance. No. CONF-941024-. American Society of Mechanical Engineers, New York, NY (Unit Cârdu, Mircea, and Malvina Baica. "Gas turbine installations with divided expansion." Energy conversion and management 43, no. 13 (2002): 1747-1756.ed States), 1994.
[200] M. Cârdu, M. Baica, Gas turbine installations with divided expansion, Energy conversion and management, 43(13) (2002) 1747-1756.
[201] Elmegaard, Brian, and Bjo?rn Qvale. "Regenerative Gas Turbines With Divided Expansion." In ASME Turbo Expo 2004: Power for Land, Sea, and Air, pp. 675-682. American Society of Mechanical Engineers, 2004.
[202] Stecco, Sergio, Umberto Desideri, and N. Bettagli. "Humid air gas turbine cycle: a possible optimization." ASME, 1993.
[203] De Paepe, Michel, and Erik Dick. "Cycle improvements to steam injected gas turbines." International journal of energy research 24, no. 12 (2000): 1081-1107.
[204] Sarabchi, K. "Performance evaluation of reheat gas turbine cycles." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 218, no. 7 (2004): 529-539.
[205] da Cunha Alves, M. A., H. F. de Franca Mendes Carneiro, J. R. Barbosa, L. E. Travieso, P. Pilidis, and K. W. Ramsden. "An insight on intercooling and reheat gas turbine cycles." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 215, no. 2 (2001): 163-171.
[206] Harvey, Simon. "Analysis of a reheat gas turbine cycle with chemical recuperation using Aspen." Energy conversion and management 38, no. 15-17 (1997): 1671-1679.
[207] Khaliq, A., and K. Choudhary. "Thermodynamic performance assessment of an indirect intercooled reheat regenerative gas turbine cycle with inlet air cooling and evaporative aftercooling of the compressor discharge." International journal of energy research 30, no. 15 (2006): 1295-1312.
[208] Marx, Martin. "Investigation and Optimisation of Intercooling in anIntercooled Recuperative Aero Engine." Master of Science, School of Engineering, Cranfield University, Cranfield (2007).
[209] Ibrahim, Thamir K., and M. M. Rahman. "Effect of compression ratio on the performance of different strategies for the gas turbine." International Journal of Automotive and Mechanical Engineering 9 (2014): 1747.
[210] C. Riegler, M. Bauer, J. Kurzke. "Some aspects of modelling compressor behavior in gas turbine performance calculations." Journal of Turbomachinery 123, no. 2 (2000): 372-378.
[211] Tsoutsanis, Elias, Nader Meskin, Mohieddine Benammar, and Khashayar Khorasani. "Transient gas turbine performance diagnostics through nonlinear adaptation of compressor and turbine maps." Journal of Engineering for Gas Turbines and Power 137, no. 9 (2015): 091201.
[212] Ilett, T., and C. J. Lawn. "Thermodynamic and economic analysis of advanced and externally fired gas turbine cycles." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 224, no. 7 (2010): 901-915.