Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 58, No. 1, June 2019, Pages 43-50

Ihsan Naiman Ibrahim1, Norazlianie Sazali1,2,*, Devarajan Ramasamy1,2,#, Ahmad Shahir Jamaludin1, Mohd Syafiq Sharip1, Haziqatulhanis Ibrahim1

1 Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
2 Centre of Excellence for Advanced Research in Fluid Flow (CARIFF), Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Kuantan, Pahang, Malaysia

*Corresponding author: azlianie@ump.edu.my
#Corresponding author: deva@ump.edu.my

Cite this articleMLA
Ihsan Naiman, Ibrahim, et al. "Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 58.1 (2019): 43-50.
APA
Ihsan Naiman, I., Norazlianie, S., Devarajan, R., Ahmad Shahir, J., Mohd Syafiq, S., & Haziqatulhanis, I.(2019). Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58(1), 43-50.
Chicago
Ihsan Naiman Ibrahim, Norazlianie Sazali, Devarajan Ramasamy, Ahmad Shahir Jamaludin, Mohd Syafiq Sharip, and Haziqatulhanis Ibrahim."Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 58, no. 1 (2019): 43-50.
Harvard
Ihsan Naiman, I., Norazlianie, S., Devarajan, R., Ahmad Shahir, J., Mohd Syafiq, S., Haziqatulhanis, I., 2019. Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 58(1), pp. 43-50.
Vancouver
Ihsan Naiman I, Norazlianie S, Devarajan R, Ahmad Shahir J, Mohd Syafiq S, Haziqatulhanis I. Effect of Impregnate Nanocellulose With Ethylene Glycol for Car Radiator Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2019;58(1): 43-50.

KEYWORDS

Nanocellulose; radiator; coolant; simulation

ABSTRACT

One of the efforts to increase the effectiveness of radiator is by adding nanocellulose in radiator coolant. Furthermore, the percentage of nanocellulose plays an important role to make sure that the amount of heat transfer can be increased by increasing the percentage of nanocellulose. The nanocellulose is used in this experiment as the nanoparticles. Radiator was modelled using One-Dimensional simulation software to predict the performance characteristics and effectiveness of the radiator with addition of nanoparticles. Besides that, method of using micro channels and fins to extend the cooling rate of a radiator ended up being a traditional technology which already reached to its maximum limit. Moreover, Heat transfer coefficient of cellulose nanofluids can be increased by increasing the size of the radiator. Increase in size of radiator may enhance better and help to increase the rate of heat transfer. In addition, it clearly states that when the flow rate of the coolant or working fluid in the radiator cooling system increase the rate of heat transfer also is increases.

REFERENCES

[1] Gao, Xunan, Bojan Savic, and Roland Baar. "A Numerical Procedure to Model Heat Transfer in Radial Turbines for Automotive Engines." Applied Thermal Engineering 153, (2019): 678-691.
[2] George, Mathew, A. K. Pandey, Nasrudin Abd Rahim, V. V. Tyagi, Syed Shahabuddin, and R. Saidur. "Concentrated photovoltaic thermal systems: A component-by-component view on the developments in the design, heat transfer medium and applications." Energy Conversion and Management 186 (2019): 15-41.
[3] Pu, Wenhao, Ning Yang, Chen Yue, Shuang Bai, and Yitung Chen. "Simulation on direct contact heat transfer in gas-molten salt bubble column for high temperature solar thermal storage." International Communications in Heat and Mass Transfer 104 (2019): 51-59.
[4] Xu, H. J., Z. B. Xing, F. Q. Wang, and Z. M. Cheng. "Review on heat conduction, heat convection, thermal radiation and phase change heat transfer of nanofluids in porous media: Fundamentals and applications." Chemical Engineering Science 195, (2018): 462-483.
[5] Lei, Gang, Weirong Li, and Qingzhi Wen. "The convective heat transfer of fractal porous media under stress condition." International Journal of Thermal Sciences 137 (2019): 55-63.
[6] Chakraborty, Pranay, Tengfei Ma, Lei Cao, and Yan Wang. "Significantly enhanced convective heat transfer through surface modification in nanochannels." International Journal of Heat and Mass Transfer 136 (2019): 702-708.
[7] Sajid, Muhammad Usman, and Hafiz Muhammad Ali. "Recent advances in application of nanofluids in heat transfer devices: a critical review." Renewable and Sustainable Energy Reviews103 (2019): 556-592.
[8] Huminic, Gabriela, and Angel Huminic. "Heat transfer capability of the hybrid nanofluids for heat transfer applications." Journal of Molecular Liquids 272 (2018): 857-870.
[9] Qi, Cong, Maoni Liu, Guiqing Wang, Yuhang Pan, and Lin Liang. "Experimental research on stabilities, thermophysical properties and heat transfer enhancement of nanofluids in heat exchanger systems." Chinese Journal of Chemical Engineering 26, no. 12 (2018): 2420-2430.
[10] Bondareva, Nadezhda S., Bernardo Buonomo, Oronzio Manca, and Mikhail A. Sheremet. "Heat transfer inside cooling system based on phase change material with alumina nanoparticles." Applied Thermal Engineering 144 (2018): 972-981.
[11] Ji, Pengfei, and Yuwen Zhang. "First-principles molecular dynamics investigation of the atomic-scale energy transport: From heat conduction to thermal radiation." International Journal of Heat and Mass Transfer 60 (2013): 69-80.
[12] Naraki, M., S. M. Peyghambarzadeh, S. H. Hashemabadi, and Y. Vermahmoudi. "Parametric study of overall heat transfer coefficient of CuO/water nanofluids in a car radiator." International Journal of Thermal Sciences 66 (2013): 82-90.
[13] Peyghambarzadeh, S. M., S. H. Hashemabadi, M. Naraki, and Y. Vermahmoudi. "Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator." Applied Thermal Engineering 52, no. 1 (2013): 8-16.
[14] Subhedar, Dattatraya G., Bharat M. Ramani, and Akhilesh Gupta. "Experimental investigation of heat transfer potential of Al2O3/Water-Mono Ethylene Glycol nanofluids as a car radiator coolant." Case Studies in Thermal Engineering 11 (2018): 26-34.
[15] Ahmed, Siraj Ali, Mehmet Ozkaymak, Adnan Sözen, Tayfun Menlik, and Abdulkarim Fahed. "Improving car radiator performance by using TiO2-water nanofluid." Engineering science and technology, an international journal 21, no. 5 (2018): 996-1005.
[16] Delavari, Vahid, and Seyed Hassan Hashemabadi. "CFD simulation of heat transfer enhancement of Al2O3/water and Al2O3/ethylene glycol nanofluids in a car radiator." Applied thermal engineering 73, no. 1 (2014): 380-390.
[17] Goudarzi, K., and H. Jamali. "Heat transfer enhancement of Al2O3-EG nanofluid in a car radiator with wire coil inserts." Applied Thermal Engineering 118 (2017): 510-517.
[18] Hussein, Adnan M., H. K. Dawood, R. A. Bakara, and K. Kadirgamaa. "Numerical study on turbulent forced convective heat transfer using nanofluids TiO2 in an automotive cooling system." Case Studies in Thermal Engineering 9 (2017): 72-78.
[19] Subudhi S, Kumar A. "Application of Nanofluids for Radiator Cooling. Reference Module in Materials Science and Materials Engineering." Elsevier; (2019).
[20] Mohammadpoor, M., S. Sabbaghi, M. M. Zerafat, and Z. Manafi. "Investigating heat transfer properties of copper nanofluid in ethylene glycol synthesized through single and two-step routes." International Journal of Refrigeration 99 (2019): 243-250.
[21] Taheran, Ehsan, and Kourosh Javaherdeh. "Experimental investigation on the effect of inlet swirl generator on heat transfer and pressure drop of non-Newtonian nanofluid." Applied Thermal Engineering 147 (2019): 551-561.
[22] Raja, M., R. Vijayan, P. Dineshkumar, and M. Venkatesan. "Review on nanofluids characterization, heat transfer characteristics and applications." Renewable and sustainable energy reviews 64 (2016): 163-173.
[23] Sundar, L. Syam, and Manoj K. Singh. "Convective heat transfer and friction factor correlations of nanofluid in a tube and with inserts: a review." Renewable and Sustainable Energy Reviews 20 (2013): 23-35.
[24] Mahian, Omid, Lioua Kolsi, Mohammad Amani, Patrice Estellé, Goodarz Ahmadi, Clement Kleinstreuer, Jeffrey S. Marshall et al. "Recent advances in modeling and simulation of nanofluid flows-part II: applications." Physics reports (2018).
[25] Ali, Hafiz Muhammad, Hassan Ali, Hassan Liaquat, Hafiz Talha Bin Maqsood, and Malik Ahmed Nadir. "Experimental investigation of convective heat transfer augmentation for car radiator using ZnO–water nanofluids." Energy 84 (2015): 317-324.
[26] Mukkamala, Yagnavalkya. "Contemporary trends in thermo-hydraulic testing and modeling of automotive radiators deploying nano-coolants and aerodynamically efficient air-side fins." Renewable and Sustainable Energy Reviews 76 (2017): 1208-1229.
[27] Ganvir, R. B., P. V. Walke, and V. M. Kriplani. "Heat transfer characteristics in nanofluid—a review." Renewable and Sustainable Energy Reviews 75 (2017): 451-460.
[28] Hong Wei Xian, Nor Azwadi Che Sidik, M’hamed Beriache. "Heat Transfer Performance of Hybrid Nanofluid as Nanocoolant in Automobile Radiator System. " Journal of Advanced Research Design 51, no. 1 (2018): 14-25.