Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Volume 65, No. 1, January 2020, Pages 109-120

Nadia Moneem Al-Abdalay1,*, Husein Ali Zeini1, Huda Zuhair Kubba2
1 Civil Department of Najaf Technical Institute, Furat Al-Awsat Technical University, Iraq
2 Civil Department of Babylon Technical Institute, Furat Al-Awsat Technical University, Iraq
*Corresponding author: nadia.material@gmail.com

KEYWORDS

Fly ash; silica fume; impact resistance; micro steel fiber; SIFCON

ABSTRACT

this paper, silica fume and fly ash class F was used as a supplementary cementing material in cement mortars to evaluate several mechanical properties of SIFCON (Slurry Infiltrated Fibrous concrete) in the way of flexural, compressive and splitting strength which were determined using the standard test method, the impact load resistance was determined using a fabricated instrument described in body paper. plate specimens with dimension of 450mm×100mm×40mm were cast with micro steel fiber of 6% volume fraction were tested under impact load for assessment with references plates at 90 days of age. From the results of the outcome it was found that the performance of conventional mortar is much less than SIFCON specimens. The compressive, splitting, flexural strength and impact resistance for conventional mortar and SIFCON specimens were investigated, a significant development in impact resistance for SIFCON mix at first crack and failure, also the energy demand for the whole failure was which is increased by 9.97 times compared with the conventional mortar. Thus, this present paper displays that SIFCON can be utilized as a powerful option in different development purposes or where the concrete or natural steel fiber reinforce concrete can’t execute surprisingly/needed or in situations where such greater strength is imperative and essential.

CITE THIS ARTICLE

MLA
Nadia Moneem, Al-Abdalay, et al. “Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 65.1 (2020): 109-120.

APA
Nadia Moneem, A., Husein, A. Z., & Huda, Z. K.(2020). Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65(1), 109-120.

Chicago
Nadia Moneem Al-Abdalay, Husein Ali Zeini and Huda Zuhair Kubba. “Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 65, no. 1 (2020): 109-120.

Harvard
Nadia Moneem, A., Husein, A.Z., and Huda, Z.K., 2020. Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 65(1), pp. 109-120.

Vancouver
Nadia Moneem A, Husein AZ, Huda ZK. Investigation of the Behavior of Slurry Infiltrated Fibrous Concrete. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2020;65(1): 109-120.

REFERENCES

[1] Miloud Hamadache, M. Mouli, O. Chaib, M. Ouldali, and E. Kh. Hamdani. “Test of a concrete bridge degraded by corrosion under the environmental effect.” Journal od Advanced Research in Materials Science 35, no. 1 ( 2017): 1-6.
[2] Kamarudin, Muhammad Hafiz, Mohd Yuhazri Yaakob, Mohd Sapuan Salit, Hasoloan Haery Ian, N. A. Badarulzaman, and R. M. Sohaimi. “A review on different forms and types of waste plastic used in concrete structure for improvement of mechanical properties.” Journal of Advanced Research in Applied Mechanics 28, no. 1 (2016): 9-30.
[3] Aziz, Annis Nazirah Abdul, and Roszilah Hamid. “Mechanical Properties and Impact Resistance of Hybrid Kenaf and Coir Fibre Reinforced Concrete.” Journal of Advanced Research in Applied Mechanics 47, no. 1 (2018): 1-10.
[4] M. Kh. Hind, M. Özakça, and T. Ekmekyapar. ” A Review on Nonlinear Finite Element Analysis of Reinforced Concrete Beams Retrofitted with Fiber Reinforced Polymers.” Journal of Advanced Research in Applied Mechanics 22, no. 1 (2016): 13-48.
[5] Chen, Yang, Faris Matalkah, Anagi Balachandra, and Parviz Soroushian. “Ultra-High-Performance Concrete: Development of On-Site Fresh Mix Rheology Test Methods.” Journal of Advanced Research in Applied Mechanics 55, no. 1 (2019): 1-11.
[6] Gilani, Adel Mohamed. “Various Durability Aspect of Slurry Infiltrated Fiber Concrete.” PhD diss., Phd Thesis, Middle East Technical University, 2007.
[7] Yaz?c?, Halit, Serdar Ayd?n, Hüseyin Yi?iter, Mert Y. Yard?mc?, and Giray Alptuna. “Improvement on SIFCON performance by fiber orientation and high-volume mineral admixtures.” Journal of Materials in Civil Engineering 22, no. 11 (2010): 1093-1101.
[8] M. Gopala Krishnan, and D. Elavarasi. “Experimental study on slurry infiltrated fibrous concrete with sand replaced by msand.” International Journal of Engineering Research & Technology 3, no. 5 (2014): 534-537.
[9] Parameswaran, V. S., T. S. Krishnamoorthy, K. Balasubramanian, and Santhi Gangadar. “Studies on slurry-infiltrated fibrous concrete (SIFCON).” Transportation Research Record 1382 (1993): 57-63.
[10] Rao, H. Sudarsana, Vaishali G. Ghorpade, N. V. Ramana, and K. Gnaneswar. “Response of SIFCON two-way slabs under impact loading.” International Journal of Impact Engineering 37, no. 4 (2010): 452-458.
[11] Pitroda, Jayeshkumar, L. B. Zala, and F. S. Umrigar. “Experimental Investigations on Partial Replacement of Cement with Fly ash in design mix concrete.” International Journal of Advanced Engineering Technology, IJAET 3, no. 4 (2012): 126-129.
[12] Pradeep, T., and Sharmila, S. “Cyclic behavior of RC beams using SIFCON sections.” International Journal of Innovative Research in Science, Engineering and Technology 4, no. 9 (2015): 9172-9177.
[13] Ali, M.A. “Properties of Slurry Infiltrated Fiber Concrete (SIFCON).” PHD Thesis, Department of Building and Construction Engineering of the University of Technology, 2018.
[14] IQS No. 5/1984. “Portland Cement.” Central Agency for Standardization and Quality Control, Planning Council, Baghdad, Iraq.
[15] ASTM, C. “1240-05 Standard, Specification for silica fume used in cementitious mixtures.” West Conshohocken, PA, American Society for Testing and Materials (2005).
[16] ASTM C618-05. “Standard specification for fly ash used in cementitious mixtures.” American Society for Testing and Material International 4, (2005): 1-3.
[17] ASTM C 494-05. “Standard specification for chemical Admixtures for concrete.” American Society for Testing and Material International, (2005).
[18] IQS No. 45/1984. “Natural sources of aggregate used in building and concrete.” Central Agency for Standardization and Quality Control, Planning Council, Baghdad, Iraq.
[19] EFNARC. “Specification and guidelines for self-compacting concrete.” European Federation for Specialist Construction Chemicals and Concrete Systems, (2005): 1-32.
[20] British Standard. “Method for determination of compressive strength of concrete cubes.” British Standards Institution 1881, Part 116, (1989): 3.
[21] ASTM C496-04. “Standard test methods for splitting tensile strength of cylindrical.” ASTM Standard 04.02, (2004): 283-287.
[22] ASTM C1609M-12. “Standard test method for flexural performance of fiber-reinforced concrete (using beam with third point loading).” American Society for Testing and Material International, (2012).
[23] Murali, G., A. S. Santhi, and G. Mohan Ganesh. “Empirical relationship between the impact energy and compressive strength for fiber reinforced concrete.” Journal of Scientific and Industrial Research 73, no. 7 (2014): 469-473.
[24] Kanagavel, Ramesh, and Arunachalam Kalidass. “Mechanical properties of hybrid fibre reinforced quaternary concrete.” Journal of the Croatioan Association of Civil Engineers 69, no. 1 (2017): 1-10.