An Overview of Different Indirect and Semi-Indirect Evaporative Cooling System for Study Potency of Nanopore Skinless Bamboo as An Evaporative Cooling New Porous Material

Authors

  • Hendra Wijaksana Department of Mechanical Engineering, Engineering Faculty, Udayana University Kampus Bukit Jimbaran, Denpasar, Bali, Indonesia
  • I. Nyoman Suprapta Winaya Department of Mechanical Engineering, Engineering Faculty, Udayana University Kampus Bukit Jimbaran, Denpasar, Bali, Indonesia
  • Made Sucipta Department of Mechanical Engineering, Engineering Faculty, Udayana University Kampus Bukit Jimbaran, Denpasar, Bali, Indonesia
  • Ainul Ghurri Department of Mechanical Engineering, Engineering Faculty, Udayana University Kampus Bukit Jimbaran, Denpasar, Bali, Indonesia

DOI:

https://doi.org/10.37934/arfmts.76.3.109116

Keywords:

Indirect evaporative cooling system, semi-indirect evaporative cooling system, nanopore skinless bamboo potency

Abstract

The high energy consumption of compressor-based cooling system has prompted the researchers to study and develop non-compressor-based cooling system that less energy consumption, less environment damaging but still has high enough cooling performances. Indirect and semi indirect evaporative cooling system is the feasible non-compressor-based cooling systems that can reach the cooling performance required. These two evaporative cooling systems has some different in construction, porous material used, airflow scheme and secondary air-cooling method used for various applications. This paper would report the cooling performances achieved by those two-cooling systems in terms of cooling efficiency, cooling capacity, wet bulb effectiveness, dew point effectiveness, and temperature drop. Porous material used in indirect and semi-indirect evaporative cooling would be highlighted in terms of their type, size, thickness and any other feature. The introduction of nanopore skinless bamboo potency as a new porous material for either indirect or semi-indirect evaporative cooling would be described. In the future study of nanopore skinless bamboo, a surface morphology and several hygrothermal test including sorption, water vapor transmission, thermal conductivity test would be applied, before it utilizes as a new porous material for direct or semi indirect evaporative cooling.

Downloads

Published

2020-11-23

How to Cite

Wijaksana, H., Winaya, I. N. S., Sucipta, M., & Ghurri, A. (2020). An Overview of Different Indirect and Semi-Indirect Evaporative Cooling System for Study Potency of Nanopore Skinless Bamboo as An Evaporative Cooling New Porous Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76(3), 109–116. https://doi.org/10.37934/arfmts.76.3.109116

Issue

Section

Articles