3D Printing Technology for Thermal Application: A Brief Review

Authors

  • Rajan Kumaresan Faculty of Mechanical & Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
  • Mahendran Samykano College of Engineering, Universiti Malaysia Pahang, 26300 Gambang, Pahang, Malaysia
  • Kumaran Kadirgama Faculty of Mechanical & Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
  • Devarajan Ramasamy College of Engineering, Universiti Malaysia Pahang, 26300 Gambang, Pahang, Malaysia
  • Ngui Wai Keng College of Engineering, Universiti Malaysia Pahang, 26300 Gambang, Pahang, Malaysia
  • Adarsh Kumar Pandey Research Centre for Nano-Materials and Energy Technology (RCNMET), School of Science and Technology, Sunway University, No. 5, Jalan Universiti, Bandar Sunway, Petaling Jaya, 47500 Selangor Darul Ehsan, Malaysia

DOI:

https://doi.org/10.37934/arfmts.83.2.8497

Keywords:

3D printing, Thermal, Energy, Impact Energy, Additive Manufacturing

Abstract

3D printing is an emerging technology to construct complex geometry by adapting layer-by-layer addition technique from a 3-dimensional CAD model. Mass customization, freedom of design, and wastage minimization are the main advantages of Additive Manufacturing (AM) based 3D printing. 3D printing is currently used in many sectors worldwide, such as automotive, aerospace, agriculture, medical, electronics, and other household products. However, the usage of the AM technique is limited in large production sectors due to the limitation of the materials and properties of the produced parts. In this review, the different methods of 3D printing, the materials used in different processes, various fields of applications, and the properties of the different approaches are discussed. Also, the effect of process parameters such as layer thickness, nozzle temperature, platform temperature, printing speed, extruding rate, and layer height in 3d printing was reviewed. This will be helpful for further development of 3D printed product quality and applications in various sectors.

References

Tofail, Syed A. M., Elias P. Koumoulos, Amit Bandyopadhyay, Susmita Bose, Lisa O'Donoghue, and Costas Charitidis. "Additive manufacturing: scientific and technological challenges, market uptake and opportunities." Materials Today 21, no. 1 (2018): 22-37. https://doi.org/10.1016/j.mattod.2017.07.001

Reddy, Bathula Sreenivas. "3D Printing for Foot." MOJ Proteomics & Bioinformatics 5, no. 6 (2017): 00176. https://doi.org/10.15406/mojpb.2017.05.00176

Aichner, Thomas. "Mass Customization: Do Creative Product Configurations in Ads Drive Behavioural Intention and Perceived Product Quality?" Proceedings of the 8th International Conference on Mass Customization and Personalization - Community of Europe (MCP-CE 2018) (2018).

Trenfield, Sarah J., Christine M. Madla, Abdul W. Basit, and Simon Gaisford. "Binder jet printing in pharmaceutical manufacturing." In 3D Printing of Pharmaceuticals, pp. 41-54. Springer, Cham, 2018. https://doi.org/10.1007/978-3-319-90755-0_3

Silbernagel, Cassidy. "Additive Manufacturing 101-4: What is material jetting?" Canada Makes, April 26, 2018. http://canadamakes.ca/what-is-material-jetting/.

Li, Pengfei, Yadong Gong, Yunchao Xu, Yang Qi, Yao Sun, and Huan Zhang. "Inconel-steel functionally bimetal materials by hybrid directed energy deposition and thermal milling: Microstructure and mechanical properties." Archives of Civil and Mechanical Engineering 19 (2019): 820-831. https://doi.org/10.1016/j.acme.2019.03.002

Dilag, Jessirie, Tiffany Chen, Sheng Li, and Stuart A. Bateman. "Design and direct additive manufacturing of three-dimensional surface micro-structures using material jetting technologies." Additive Manufacturing 27 (2019): 167-174. https://doi.org/10.1016/j.addma.2019.01.009

Tofail, Syed AM, Elias P. Koumoulos, Amit Bandyopadhyay, Susmita Bose, Lisa O'Donoghue, and Costas Charitidis. "Additive manufacturing: scientific and technological challenges, market uptake and opportunities." Materials Today 21, no. 1 (2018): 22-37. https://doi.org/10.1016/j.mattod.2017.07.001

Vijayavenkataraman, Sanjairaj, Jerry YH Fuh, and Wen Feng Lu. "3D printing and 3D bioprinting in pediatrics." Bioengineering 4, no. 3 (2017): 63. https://doi.org/10.3390/bioengineering4030063

Razavykia, Abbas, Eugenio Brusa, Cristiana Delprete, and Reza Yavari. "An Overview of Additive Manufacturing Technologies-A Review to Technical Synthesis in Numerical Study of Selective Laser Melting." Materials 13, no. 17 (2020): 3895. https://doi.org/10.3390/ma13173895

Aduba Jr, Donald C., Evan D. Margaretta, Alexandra EC Marnot, Katherine V. Heifferon, Wyatt R. Surbey, Nicholas A. Chartrain, Abby R. Whittington, Timothy E. Long, and Christopher B. Williams. "Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications." Materials Today Communications 19 (2019): 204-211. https://doi.org/10.1016/j.mtcomm.2019.01.003

Shahrubudin, Nurhalida, Te Chuan Lee, and Rhaizan Ramlan. "An overview on 3D printing technology: Technological, materials, and applications." Procedia Manufacturing 35 (2019): 1286-1296. https://doi.org/10.1016/j.promfg.2019.06.089

Chartrain, Nicholas A., Christopher B. Williams, and Abby R. Whittington. "A review on fabricating tissue scaffolds using vat photopolymerization." Acta Biomaterialia 74 (2018): 90-111. https://doi.org/10.1016/j.actbio.2018.05.010

Frketic, Jolie, Tarik Dickens, and Subramanian Ramakrishnan. "Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing." Additive Manufacturing 14 (2017): 69-86. https://doi.org/10.1016/j.addma.2017.01.003

Nikhil, A. "3D Printing Processes - Vat Photo polymerisation (Part 3/8)." Engineers Garage, January 10, 2017. https://www.engineersgarage.com/tech-articles/3d-printing-processes-vat-photo-polymerisation-part-3-8/.

Tofail, Syed A. M., Elias P. Koumoulos, Amit Bandyopadhyay, Susmita Bose, Lisa O'Donoghue, and Costas Charitidis. "Additive manufacturing: scientific and technological challenges, market uptake and opportunities." Materials Today 21, no. 1 (2018): 22-37. https://doi.org/10.1016/j.mattod.2017.07.001

Dehghanghadikolaei, Amir, Navid Namdari, Behrouz Mohammadian, and B. J. J. O. S. Fotovvati. "Additive manufacturing methods: a brief overview." Journal of Scientific and Engineering Research 5 (2018): 123-131.

Diegel, Olaf, Axel Nordin, and Damien Motte. "Additive manufacturing technologies." In A Practical Guide to Design for Additive Manufacturing, pp. 19-39. Springer, Singapore, 2019. https://doi.org/10.1007/978-981-13-8281-9_2

Lee, Jian-Yuan, Jia An, and Chee Kai Chua. "Fundamentals and applications of 3D printing for novel materials." Applied Materials Today 7 (2017): 120-133. https://doi.org/10.1016/j.apmt.2017.02.004

Ramya, A., and Sai Leela Vanapalli. "3D printing technologies in various applications." International Journal of Mechanical Engineering and Technology 7, no. 3 (2016): 396-409.

Additively. "Overview over 3D printing technologies." Additively.com, Accessed January 29, 2021. https://www.additively.com/en/learn-about/3d-printing-technologies.

Ngo, Tuan D., Alireza Kashani, Gabriele Imbalzano, Kate T. Q. Nguyen, and David Hui. "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges." Composites Part B: Engineering 143 (2018): 172-196. https://doi.org/10.1016/j.compositesb.2018.02.012

Stratasys. "Aerospace - Parts On Demand." Stratasys Direct Manufacturing, Accessed January 29, 2021. https://www.stratasysdirect.com/.

Abdalla, A., H. H. Hamzah, O. Keattch, D. Covill, and B. A. Patel. "Augmentation of conductive pathways in carbon black/PLA 3D-printed electrodes achieved through varying printing parameters." Electrochimica Acta 354 (2020): 136618. https://doi.org/10.1016/j.electacta.2020.136618

Wang, Peng, Bin Zou, Shouling Ding, Lei Li, and Huang Chuanzhen. "Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK." Chinese Journal of Aeronautics (2020). https://doi.org/10.1016/j.cja.2020.05.040

Liu, Lingyi, and Ozan N. Ciftci. "Effects of high oil compositions and printing parameters on food paste properties and printability in a 3D printing food processing model." Journal of Food Engineering 288 (2021): 110135. https://doi.org/10.1016/j.jfoodeng.2020.110135

Liu, Zhixin, Mingyang Li, Yiwei Weng, Ye Qian, Teck Neng Wong, and Ming Jen Tan. "Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine." Composites Part B: Engineering 193 (2020): 108018. https://doi.org/10.1016/j.compositesb.2020.108018

Tay, Yi Wei Daniel, Ming Yang Li, and Ming Jen Tan. "Effect of printing parameters in 3D concrete printing: printing region and support structures." Journal of Materials Processing Technology 271 (2019): 261-270. https://doi.org/10.1016/j.jmatprotec.2019.04.007

Carlier, E., S. Marquette, C. Peerboom, L. Denis, S. Benali, J. M. Raquez, K. Amighi, and J. Goole. "Investigation of the parameters used in fused deposition modeling of poly (lactic acid) to optimize 3D printing sessions." International Journal of Pharmaceutics 565 (2019): 367-377. https://doi.org/10.1016/j.ijpharm.2019.05.008

Munprom, Ratiporn, and Sorawit Limtasiri. "Optimization of stereolithographic 3D printing parameters using Taguchi method for improvement in mechanical properties." Materials Today: Proceedings 17 (2019): 1768-1773. https://doi.org/10.1016/j.matpr.2019.06.209

Downloads

Published

2021-06-16

How to Cite

Kumaresan, R., Samykano, M., Kadirgama, K., Ramasamy, D., Ngui Wai Keng, & Pandey, A. K. (2021). 3D Printing Technology for Thermal Application: A Brief Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83(2), 84–97. https://doi.org/10.37934/arfmts.83.2.8497
صندلی اداری سرور مجازی ایران Decentralized Exchange

Issue

Section

Articles

Most read articles by the same author(s)

فروشگاه اینترنتی